Windows® 2000/XP Printing (Printer Driver already installed); Have Disk; Add Port- Page 36

NETWORK PRINTING FROM WINDOWS

® 

(Peer to Peer) 4 - 3

NC9100h_FM6.0

9

Windows

®

 2000/XP will now contact the printer that you 

specified. If you did not specify the correct IP address or name 
then you will receive an error message.

10

Click the 

Finish

 button to complete the Wizard.

11

Now that you have configured the port, you must specify which 
printer driver you wish to use. Select the appropriate driver from 
the list of supported printers. If you are using a driver supplied 
with the machine on CD-ROM then select the 

Have Disk

 option 

to browse to the CD-ROM. 

12

Select the “X:\ENG\W2K\Addprt” folder (where X is your drive 
letter). Click on 

Open

, then 

OK

. Select your printer model, then 

click 

Next

 (example is for Windows

®

 2000).

13

When the driver is installed, click the 

Next

 button.

14

Specify a name and click the 

Next

 button.

15

Now specify if you wish to share the printer, enter the share 
name and click 

Next

.

16

Continue through the Wizard clicking the 

Finish

 button when 

complete.

Windows

®

 2000/XP Printing 

(Printer Driver already installed)

If you have already installed the printer driver and wish to configure 
it for network printing, follow these steps:

1

Select the printer driver you wish to configure.

2

Select 

File

 and then choose 

Properties

.

3

Click the 

Ports

 tab of the driver and click 

Add Port

.

4

Select the port that you wish to use. Typically this would be 

Standard TCP/IP Port

. Then click the 

New Port...

 button.

5

The 

standard TCP/IP Port Wizard

 will start. Follow steps 6 to 

10 of the “Standard TCP/IP Port Printing” section starting on the 
previous page.