TCP/IP Printing; Installing the Brother Peer to Peer Software; Software Installation- Page 38

NETWORK PRINTING FROM WINDOWS

® 

(Peer to Peer) 4 - 5

NC9100h_FM6.0

TCP/IP Printing

Brother’s Peer to Peer printing software requires the TCP/IP protocol 
to be installed on your Windows

®

 peer-to-peer computers and an IP 

Address has to be defined for the Print/Scan server. Refer to your 
Windows

®

 documentation for more information on how to configure 

the TCP/IP protocol on your Windows

®

 PC.

If you haven't already done so, configure the IP address of the 
machine, for more information on IP address configuration, refer to 

chapter 2

 of this user guide. 

Installing the Brother Peer to Peer Software

1

Start the CD-ROM installation menu program according to the 
Quick Setup Guide.

2

Select the proper model and then the 

Software Installation

menu. Then select the appropriate menu to start the 

Brother 

Network Print Software 

installation program.

3

Push the 

Next

 button in response to the Welcome message.

4

Select the 

Brother Peer to Peer Print (LPR)

 button.

5

Select the desired directory to install the 

Brother Peer to Peer 

Print (LPR)

 files and push 

Next

. The installation program will 

create the directory for you if it does not already exist on your 
disk.

6

Enter the 

Port name

 that you wish to use and click 

OK

. The 

default port name is BLP1. Whichever name you choose, it must 
be unique and it MUST begin with BLP.

If you already installed the driver from the printer’s CD-ROM 
Installer and you selected “Brother Peer-to-Peer Network 
Printer” during the installation then you do not need to install 
the Brother Network Print Software again.