Black Start; Color Start; 11 - 2- Page 130

Brother MFC-5440CN User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

USERā€™S GUIDE MFC-5440CN/MFC-5840CN
background image

TROUBLESHOOTING AND ROUTINE MAINTENANCE   

11 - 2

DR Mode in 
Use

The MFC is set to Distinctive Ring 
mode. You can not change the 
Receive Mode from Manual to 
another mode.

Set Distinctive Ring to Off. 
(See 

Turning off the Distinctive Ring

 on page 

A-4.)

High 
Temperature

The print head is too warm.

Allow the MFC to cool down.

Ink Empty

One or more of the ink cartridges 
is empty. The MFC will stop all 
print operations. While memory is 
available, black and white faxes 
will be received into memory. If a 
sending machine has a color fax, 
the MFCā€™s ā€˜handshakeā€™ will 
request that the fax be sent as 
black and white. If the sending 
machine has the ability to convert 
it, the color fax will be received into 
memory as a black and white fax.

Replace the ink cartridges. 
(See 

Replacing the ink cartridges

 on page 

11-25.)

Low 
Temperature

The print head is too cold.

Allow the MFC to warm up.

Media Error

(MFC-5840CN 
only)

The media card is either 
corrupted, improperly formatted, 
or there is a problem with the 
media drive.

Re-insert the card firmly into the slot to make 
sure it is in the proper position. If the error 
remains, check the media drive by inserting 
another media card that you know is working.

Near Empty

One or more of the ink cartridges 
are running out of ink. If a sending 
machine has a color fax, the 
MFCā€™s ā€˜handshakeā€™ will request 
that the fax be sent as black and 
white. If the sending machine has 
the ability to convert it, the color 
fax will be received into memory 
as a black and white fax.

Order a new ink cartridge. 
(See 

Ordering accessories and supplies

 on 

page ii.)

No Cartridge

An ink cartridge is not properly 
installed.

Take out the ink cartridge and put it in again 
seating it properly.
(See 

Replacing the ink cartridges

 on page 

11-25.)

No File

(MFC-5840CN 
only)

The media card in the media drive 
does not contain a .JPG file.

Re-insert the correct media.

(For MFC-5440CN)

No Paper Fed

(For MFC-5840CN)

No Paper Fed #1

No Paper Fed #2

The MFC is out of paper.

Add paper, and then press 

Black Start

 or 

Color Start

.

The paper is jammed in the MFC.

See 

Printer jam or paper jam

 on page 11-6.

The paper loaded in Tray#2 is the 
wrong size or type. (MFC-5840CN 
only)

Check the paper loaded in Tray#2. You can 
only use plain paper sizes Letter, Legal, A4, 
Executive or B5 in this way.

ERROR MESSAGES

ERROR 
MESSAGE

CAUSE

ACTION

Detailed Information for Brother MFC-5440CN User's Guide

Lists of information found in Brother MFC-5440CN User's Guide - Page 130

  • 4.) High Temperature The print head is too warm.
  • 25.) Low Temperature The print head is too cold.
  • 25.) No File (MFC-5840CN only) The media card in the media drive does not contain a .
  • 6. The paper loaded in Tray#2 is the wrong size or type.
  • 2. You can only use plain paper sizes Letter, Legal, A4, Executive or B5 in this way.

Related Documents for Brother MFC-5440CN User's Guide