Cleaning the outside of the machine; Cleaning the outside of the ; Clean the outside of the machine as - Page 131

Troubleshooting and Routine Maintenance

121

DO NOT dismantle or tamper with the ink 
cartridge, this can cause the ink to leak out 
of the cartridge.

Brother multifunction machines are 
designed to work with ink of a particular 
specification and will work to a level of 
optimum performance when used with 
genuine Brother Branded ink cartridges. 
Brother cannot guarantee this optimum 
performance if ink or ink cartridges of other 
specifications are used. Brother does not 
therefore recommend the use of cartridges 
other than genuine Brother Branded 
cartridges or the refilling of empty 
cartridges with this machine or the refilling 
of empty cartridges with ink from other 
sources. If damage is caused to the print 
head or other parts of this machine as a 
result of using incompatible products with 
this machine, any repairs required as a 
result may not be covered by the warranty.

Cleaning the outside of the 
machine

B

CAUTION

Use neutral detergents. Cleaning with 
volatile liquids such as thinner or benzine 
will damage the outside surface of the 
machine.

DO NOT use cleaning materials that 
contain ammonia.

DO NOT use isopropyl alcohol to remove 
dirt from the control panel. It may crack the 
panel.

Clean the outside of the machine as 
follows:

B

a

Pull the paper tray (1) completely out of 
the machine.

b

Wipe the outside of the machine with a 
soft cloth to remove dust.

c

Remove anything that is stuck inside the 
paper tray.

d

Lift the output paper tray cover and wipe 
the inside and outside of the paper tray 
with a soft cloth to remove dust.

e

Close the output paper tray cover and 
put the paper tray firmly back in the 
machine.

1