Auto Select- Page 27

Loading documents and paper

17

2

d

Gently put the paper into the paper tray 
print side down and top edge first.
Check that the paper is flat in the tray and 
below the maximum paper mark (1).

Note

When you put the paper into the paper tray, 
slide the paper in making sure that it touches 

the paper length guide (1) first, then gently 
lower the other end of the paper.

e

Gently adjust the paper side guides with 
both hands to fit the paper.
Make sure the paper side guides touch 
the sides of the paper.

Note

Be careful that you do not push the paper 
in too far; it may lift at the back of the tray 
and cause feed problems.

f

Push the paper tray firmly back into the 
machine.

Note

If you are using 

Auto Select

, after refilling 

the paper tray you should open and close 
the scanner cover to reset the machine.

1

1