STEP 1 Setting Up the Machine; 1 Removing the protective parts; 2 Loading paper- Page 6

Setting Up the Machine

4

STEP 1

 1

 1

Removing the protective 

parts

1

Remove the protective tape and film covering 
the scanner glass.

2

Remove the foam bag containing the ink 
cartridges from on top of the paper tray.

Improper Setup

DO NOT connect the interface cable. 
Connecting the interface cable is done during 
the software installation process.

 2

Loading paper

You can load up to 100 sheets of 20 lb 
(80 g/m

2

) paper.

For details, see Acceptable paper and other 
media in Chapter 2 of the User’s Guide.

Note

For Tray#2, see Loading paper in paper tray#2 
(MFC-5860CN only) on page 6.

1

Pull the paper tray completely out of the 
machine. If the paper support flap (1) is open, 
close it and lift the output paper tray cover (2).

2

Press and slide the paper side guides (1) and 
paper length guide (2) to fit the paper size.

1

1

2

11

2