4 Connecting the phone line; Improper Setup; Setting Up the Machine- Page 9

Setting Up the Machine

7

Note

When you put the paper into the paper tray, slide 
the paper in making sure that it touches the paper 
length guide (1) first, then gently lower the other 
end of the paper.

6

Gently adjust the paper side guides with both 
hands to fit the paper.
Make sure the paper side guides touch the 
sides of the paper.

Note

Be careful that you do not push the paper in too 
far; it may lift at the back of the tray and cause feed 
problems.

7

Close the tray cover.

8

Slowly push the paper tray completely into the 
machine.

 4

Connecting the phone line 

1

Connect the telephone line cord. Connect one 
end of the telephone line cord to the jack on the 
machine marked 

LINE

 and the other end to a 

modular wall jack.

Improper Setup

DO NOT connect the interface cable. 
Connecting the interface cable is done during 
the software installation process.

Note

If you are sharing one phone line with an external 
telephone, connect it as shown below.

1 Extension telephone
2 External telephone

1

1

2