31
5
5
Overview
5
If you are a Windows
®
user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please
follow the instructions in this chapter. This chapter explains how to install the network software and the printer
driver which you will need to be able to print using your network printer.
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you have not
configured the IP address, see
Configuring your network printer
on page 7 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• If you are connecting to a Nework Print Queue or Share (printing only), see
Network Print Queue or Share (printer driver only)
on page 56 for installation details.
For Windows
®
98/Me/2000/XP users
5
Windows
®
98/Me/2000/XP users can send print job using Brother Peer-to-Peer Print software provided on
the CD-ROM which we have supplied with the machine.
If you have already installed the printer driver, jump to
Printer driver already installed
Configuring the standard TCP/IP port
5
Printer driver not yet installed
5
a
Start the CD-ROM installation menu program according to the Quick Setup Guide.
b
Select the model name and your language (if necessary), and then click
Install Other Drivers or
Utilities
.
c
Click
Printer Driver (Only)
.
d
Click
Next
in response to the Welcome message. Follow the on-screen instructions.
e
Select
Standard Installation
and click
Next
.
f
Select
Brother Peer-to-Peer Network Printer
, and then click
Next
.
g
Follow the on-screen instruction, and then click
OK
.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h
Continue through the Wizard clicking
Finish
when complete.
Network printing from Windows
®
basic
TCP/IP Peer-to-Peer printing
5