For USB Interface Users (For Mac OS® X 10.2.4 or greater); 15 Before you install; 16 Connect the USB cable- Page 18

18

Macintosh

®

USB

For USB Interface Users (For Mac OS

®

 X 10.2.4 or greater)

15

Before you install

a

Make sure your machine is connected to the 
power and your Macintosh

®

 is ON. You must 

be logged on with Administrator rights.

16

Connect the USB cable

a

Lift the scanner cover until it locks securely into 
the open position.

b

Connect the USB cable to the USB socket 
marked with a 

 symbol. You will find the 

USB socket inside the machine on the right as 
shown below.

c

Carefully route the USB cable through the 
trench and out the back of the machine as 
shown below and connect the cable to your 
Macintosh

®

.

Important

• For Mac OS

®

 X 10.2.0 to 10.2.3 users, 

upgrade to Mac OS

®

 X 10.2.4 or greater. (For 

the latest information for Mac OS

®

 X, visit 

http://solutions.brother.com/)

• Make sure there are no memory cards or a 

USB Flash memory drive inserted.

Important

• DO NOT connect the machine to a USB port 

on a keyboard or a non-powered USB hub. 

• Connect the machine directly to your 

Macintosh

®

.

Important

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

LAN

USB