To Stop a Broadcast In Progress; Overseas Mode; Black Start- Page 68

3 - 13

   SETUP SEND

To Stop a Broadcast In Progress

1

Press 

Menu/Set

, 

2

, 

6

.

The LCD will display the fax number being dialed.

2

Press 

Menu/Set

.

The LCD will display:

3

Press 

1

 to Clear.

The LCD will then display the Broadcast job number and 1.Clear 
2.Exit.

4

To cancel the Broadcast, press 

1

.

5

Press 

Stop/Exit

.

Overseas Mode

If you are having difficulty sending a fax overseas due to possible 
interference on the phone line, we recommend that you turn on the 
Overseas Mode. After you send a fax using this feature, the feature 
will turn itself off.

1

If it is not illuminated in green, press 

 (

Fax

).

2

Load your document.

3

Press 

Menu/Set

, 

2

, 

2

, 

7

.

4

Press 

▲

 or 

▼

 to select 

On

 (or 

Off

).

Press 

Menu/Set

.

■

If you did not use up any of the numbers for Groups, access 
codes or credit card numbers, you can ‘broadcast’ faxes to 
as many as 130 different numbers.

■

The available memory will vary depending on the types of jobs in 
the memory and the number of locations used for broadcasting. 
If you broadcast to the maximum numbers available, you will not 
be able to use Dual Access and Delayed fax.

■

Enter the long dialing sequence numbers as you would 
normally, but remember that each and Speed-Dial number 
counts as one number, so the number of locations you can 
store becomes limited.

■

If the memory is full, press 

Stop/Exit

 to stop the job or if 

more than one page has been scanned, press 

Black Start

to send the portion that is in the memory.

XXXXXXXXXX
1.Clear 2.Exit

Setup Send
7.Overseas Mode