For Mac OS® 9.1 to 9.2; Improper Setup; Installing the Driver & Software- Page 34

Installing the Driver & Software

32

STEP2

M

a

c

int

os

h

®

Wi

re

d

Netw

o

rk

Macintosh

®

For Mac OS

®

 9.1 to 9.2

Important

Make sure that you have finished the 
instructions from Step 1 

Setting Up the 

Machine

 on page 4-11.

1

Unplug the machine from the AC outlet.

2

Turn on your Macintosh

®

.

3

Put the supplied CD-ROM into your CD-ROM 
drive.

4

Double-click the 

Start Here OS 9.1-9.2

 icon to 

install the printer and scanner drivers. If the 
language screen appears, choose your 
language.

5

Click 

MFL-Pro Suite

 to install.

6

Follow the on-screen instructions, and restart 
your Macintosh

®

.

7

Open the scanner cover to its open position.

8

Connect the network cable to the LAN socket 

marked with a 

 symbol. You will find the 

LAN socket above and to the left of the ink 
cartridge slots, as shown below.

9

Carefully route the network cable through the 
trench and out the back of the machine as 
shown below.
Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

Note

In case of using both USB and LAN cables, route 
both cables into the trench with one on top of the 
other.

10

Lift the scanner cover to release the lock. 
Gently push the scanner cover support down 
and close the scanner cover.