Improper Setup; Installing the Driver & Software; a keyboard or a non-powered USB hub. - Page 21

Installing the Driver & Software

19

W

in

dow

s

®

US

B

Windows

®

6

After reading and accepting the ScanSoft™ 
PaperPort™ 11SE License Agreement, click 

Yes

.

7

The installation of ScanSoft™ PaperPort™ 
11SE will automatically start and is followed by 
the installation of MFL-Pro Suite.

8

When the Brother MFL-Pro Suite Software 
License Agreement window appears, click 

Yes

if you agree to the Software License 
Agreement.

Note

For Windows Vista

™

, when this screen appears, 

click the check box and click 

Install

 to complete 

the installation properly.

9

When this screen appears, go to the next step.

10

Using both hands, use the plastic tabs on both 
sides of the machine to lift the scanner cover 
until it locks securely into the open position.

11

Insert the USB cable into the USB socket 
marked with a 

 symbol. You will find the 

USB socket inside the machine on the right as 
shown below.

12

Carefully route the USB cable through the 
trench and out the back of the machine as 
shown below and connect the cable to your 
computer.

Improper Setup

• DO NOT connect the machine to a USB port on 

a keyboard or a non-powered USB hub. 
Brother recommends that you connect the 
machine directly to your computer.

• Make sure that the cable does not restrict the 

cover from closing, or an error may occur.

• Make sure you use a USB 2.0 cable that is no 

longer than 6 feet (2 meters) long.