Web Based Management (web browser); Restoring the network settings to factory default; Print the Network Configuration List- Page 29

For Network Users

27

3

Web Based Management 

(web browser)

The Brother print server is equipped with a web server 
that allows you to monitor its status or change some 
of its configuration settings, using HTTP (Hyper Text 
Transfer Protocol).

Note

• The User Name is ‘

admin

’ and the default 

password is ‘

access

’. You can use a web 

browser to change this password.

• We recommend Microsoft Internet Explorer 

6.0

®

 (or higher) or Firefox

®

 1.0 (or higher) for 

Windows

®

 and Safari™ 1.0 for Macintosh

®

. 

Please also make sure that JavaScript and 
cookies are always enabled in whichever 
browser you use. We recommend you upgrade 
to Safari™ 1.2 or higher to enable JavaScript. 
To use a web browser, you will need to know 
the IP address of the print server.

1

Open your browser.

2

Type http:// printer_ip_address /into your 
browser (Where “printer_ip_address” is the IP 
address of the printer or the print server name).

„

For example http://192.168.1.2/ 

See Chapter 2 of the Network User's Guide.

4

Restoring the network 

settings to factory default

To restore all network settings of the internal 
Print/Scan server to factory default, please follow the 
steps below.

1

Make sure the machine is not in use, then 
disconnect all the cables from the machine 
(except power cable).

2

Press 

Menu

, 

4

, 

0

.

3

Press 

1

 to select 

Reset

.

4

Press 

1

 to select 

Yes

.

5

The machine will restart. Re-connect cables 
once this is complete.

5

Print the Network 

Configuration List

You can print the Network Configuration List to 
confirm the current network settings.  To print the 
Network Configuration List:

1

Make sure that the front cover is closed and the 
power cord is plugged in.  

2

Turn on the machine and wait until the machine 
is in the Ready state.  

3

Press 

Reports

 and  

 or 

  to select 

Network Configuration.  Press 

OK

.  The 

machine will print the current network settings.