Gateway; Node Name- Page 29

Control panel setup

21

3

Gateway

3

This field displays the current gateway or router address used by the machine. If you are not using DHCP or 
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a 
gateway or router, leave this field blank. Check with your network administrator if you are unsure.

a

Press 

Menu

.

b

Press 

a

 or 

b

 to choose 

LAN

.

Press 

OK

.

c

Press 

a

 or 

b

 to choose 

TCP/IP

.

Press 

OK

.

d

Press 

a

 or 

b

 to choose 

Gateway

.

Press 

OK

.

e

(For MFC-7440N)
Press 

1

 to choose 

Change

.

(For DCP-7045N)
Press 

a

 to choose 

Change

.

f

Enter the Gateway address.
Press 

OK

.

Note

For DCP-7045N, press 

a

 or 

b

 repeatedly to enter the first three-digit number for the Gateway address. 

Press 

OK

 to enter the second three-digit number. Repeat this step until you have entered the fourth 

three-digit number to complete the Gateway address. Press 

OK

.

g

Press 

Stop/Exit

.

Node Name

3

You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will 
be the name that is registered by the WINS server on your network. Brother recommends the name 
“BRNxxxxxxxxxxxx”.

a

Press 

Menu

.

b

Press 

a

 or 

b

 to choose 

LAN

.

Press 

OK

.

c

Press 

a

 or 

b

 to choose 

TCP/IP

.

Press 

OK

.

d

Press 

a

 or 

b

 to choose 

Node Name

.

Press 

OK

.

(For MFC-7440N) Go to 

e

.

(For DCP-7045N) Go to 

f

.