Restoring the network settings to factory default; 3 - 8- Page 25

Front Panel Setup

3 - 8

3

Restoring the network settings to factory default

If you wish to reset the print/scan server back to its default factory settings (resetting all information such as 
the password and IP address information), please follow these steps:

1

Make sure the machine is not operating, then disconnect all the cables from the machine (except power 
cable).

2

Press Menu/Set, 5, 0.

3

Press 1 to select 

Reset

.

4

Press 1 to select 

Yes

.

5

The machine will re-start, re-connect cables once this is complete.