Using the SES/WPS/AOSS control panel menu to configure your machine for a wireless network (Automatic Wireless mode); Using the SES/WPS/AOSS control panel menu to configure your machine for a ; wireless network (Automatic Wireless mode)- Page 41

Configuring your machine for a wireless network

32

3

Using the SES/WPS/AOSS control panel menu to configure your machine for a 
wireless network (Automatic Wireless mode)

3

If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup™ (PBC

1

) or 

AOSS™, you can configure the machine easily without a computer. Your Brother machine has the 

SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode your access 

point uses, SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™. By pushing a button on the wireless 

LAN router / access point and the machine, you can setup the wireless network and security settings. See 

the user’s guide for your wireless LAN router / access point for instructions on how to access one-push mode.

1

Push Button Configuration

Note

Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™ have the 
symbols shown below.

a

Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.

b

Press 

Menu

, 

5

, 

2

, 

7

. Using 

a

 or 

b

, choose 

On

 and press 

OK

.

Press 

Stop/Exit

.

WLAN Enable
On

c

Press 

Menu

, 

5

, 

2

, 

3

 for 

SES/WPS/AOSS

.

WLAN
3.SES/WPS/AOSS

This feature will automatically detect which mode (SecureEasySetup™, Wi-Fi Protected Setup™ or 
AOSS™) your access point uses to configure your machine.

Note

If your wireless access point supports Wi-Fi Protected Setup™ (PIN Method) and you want to configure 

your machine using the PIN (Personal Identification Number) Method, see 

Using the PIN Method of Wi-Fi 

Protected Setup™

 on page 34.

d

The machine searches for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup™ 
or AOSS™ for 2 minutes.

Setting WLAN

e

Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup™ mode or AOSS™ 
mode, depending on what is supported by your access point. Please refer to the instruction manual that 
came with your access point.