Using the Brother installer application on the CD-ROM to configure your machine for a wireless network; Add a wireless device; Start Here OSX- Page 44

Configuring your machine for a wireless network

35

3

Note

To use a Windows Vista

®

 computer as a Registrar, you need to register it to your network in advance. See 

the instruction manual that came with your access point / router.

1

Click 

Start

 and then 

Network

.

2

Click 

Add a wireless device

.

3

Choose your printer and click 

Next

.

4

Input the PIN which the LCD shows in 

d

 on page 34 and then click 

Next

.

5

Choose your network that you want to connect to, and then click 

Next

.

6

Click 

Close

.

f

If the LCD shows 

Connected

, the machine has successfully connected to your router or access point. 

You can now use your machine in a wireless network.

If the LCD shows 

Connection NG

 or

Connection error

, the machine has not successfully 

connected to your router or access point. Try starting from 

c

 again. If the same message is indicated 

again, reset the machine back to the default factory settings and try again. For resetting, see 

Restoring 

the network settings to factory default

 on page 87.

(For Windows

®

)

You have completed the wireless network setup. If you would like to continue installing drivers and 
software necessary for operating your device, please choose Install 

MFL-Pro Suite

 from the CD-

ROM menu.

(For Macintosh

®

)

You have completed the wireless network setup. If you would like to continue installing drivers and 
software necessary for operating your device, please choose 

Start Here OSX

 from the CD-ROM 

menu.

Using the Brother installer application on the CD-ROM to configure your 
machine for a wireless network

3

For installation, see 

Wireless configuration for Windows

®

 using the Brother installer application

in Chapter 4 

and 

Wireless configuration for Macintosh

®

 using the Brother installer application

in Chapter 5.