Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server; Brother Internet Print: Using BRAdmin ; Professional utility to Configure the Print Server- Page 50

CONFIGURING INTERNET PRINTING FOR WINDOWS

®

 5 - 4

NC9100h_FM6.0

Brother Internet Print: Using BRAdmin 
Professional utility to Configure the Print Server

The steps required to configure the Print/Fax server to receive print 
jobs from a Windows

®

 95/98/Me/2000/XP and Windows NT

®

4.0 PC 

running the BIP software are as follows.

1

Start BRAdmin Professional utility.

2

Select the node name of the desired Brother Print/Fax server 
from the list and double click on it. (the default node name is 
usually 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of the 

Ethernet address (MAC address)). You will be prompted for a 
password; the default password is 

access

.

3

Click on the POP3/SMTP tab.

4

Enter the address of the POP3 server (consult your network 
administrator if you do not know this address).

5

Enter the mailbox name for the remote Brother Print/Fax server. 
Usually this will be the first part of the E-mail address (for 
example, if the E-mail address of the print server is 

emailprinter@xyz

, then the mailbox name would be 

emailprinter

).

6

Enter the password for the mailbox, if any.

Skip this section if you wish to use the Web Browser to 
configure the Print/Fax server.

Using the BRAdmin Professional utility, you can configure 
the Brother print server using the TCP/IP protocol, or the IPX 
protocol.

You can find the node name and MAC address by printing 
out the machine configuration page. For information on how 
to print the configuration page on your Print/Fax server, see 
Resetting the Print/Fax Sever back to factory settings (Test 
Switch) on page 13-4.