Setup TCP/IP; BOOT Method; Boot Method- Page 91

10 - 2 FRONT PANEL SETUP MENU

Running H/F 4

Setup TCP/IP

This menu has nine sections: Boot Method, IP Address, Subnet 
Mask, Gateway, Host Name, WINS Config, WINS Server, DNS 
Server and APIPA.

BOOT Method

1

Press 

Menu

, 

6

, 

1

, 

1

. 

2

Press 

 or 

 to select 

Auto

, 

Static

, 

RARP

, 

BOOTP

 or 

DHCP

.

3

Press 

Set

.

4

Press 

Stop/Exit

.

Static
In this mode the machine IP address must be manually assigned. 
Once entered the IP address is locked to the assigned address.

Auto
In this mode, the machine will scan the network for a DHCP server, 
if it can find one, and if the DHCP server is configured to allocate an 
IP address to the machine, then the IP address supplied by the 
DHCP server will used. If no DHCP server is available, then the 
machine will scan for a BOOTP server. If a BOOTP server is 
available, and it is configured correctly, the machine will take its IP 
address from the BOOTP server. After it is initially powered ON, it 
may take a few minutes for the machine to scan the network for a 
server.

The machine supports “POWER SAVE mode” and you are 
using the AUTO Boot mode, POWER SAVE must be set to 
OFF.