Brother Branded Supplies.; Setting Up the Machine; need to replace them. If you do so, it may - Page 12

Brother MFC-845CW Quick Setup Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

Quick Setup Guide MFC-845CW
background image

Setting Up the Machine

10

STEP1

6

Install each ink cartridge in the direction of the 
arrow on the label. 
Take care to match the color of the lock release 
lever (1) with the cartridge color (2), as shown 
in the diagram below.

 

 

7

Lift each lock release lever and gently push it 
until it clicks, and then close the ink cartridge 
cover. 

 

Note

If the LCD prompts you to re-insert the ink 
cartridge correctly, after you install the ink 
cartridges, check that the ink cartridges are 
installed properly.

 

The machine will clean the ink tube system for 
use for the first time. This process will occur 
only once, the first time ink cartridges are 
installed. The cleaning process will last 
approximately four minutes.
The LCD shows:

 

Cleaning

i i i i i

Preparing System

Approx 4 Minutes

Caution

• DO NOT take out ink cartridges if you do not 

need to replace them. If you do so, it may 
reduce the ink quantity and the machine will 
not know the quantity of ink left in the 
cartridge.

• DO NOT shake the ink cartridges. If ink stains 

your skin or clothing, wash with soap or 
detergent at once.

• DO NOT repeatedly insert and remove the 

cartridges. If you do so, ink may seep out of the 
cartridge.

• If you mix the colors by installing an ink 

cartridge in the wrong position, clean the print 
head several times after correcting the 
cartridge installation. (See 

Cleaning the print 

head in Appendix B of the User’s Guide

.)

• Once you open an ink cartridge, install it in the 

machine and use it up within six months of 
installation. Use unopened ink cartridges by 
the expiration date written on the cartridge 
package.

• DO NOT dismantle or tamper with the ink 

cartridge, this can cause the ink to leak out of 
the cartridge.

• Brother strongly recommends that you do not 

refill the ink cartridges provided with your 
machine. We also strongly recommend that 
you continue to use only Genuine Brother 
Brand replacement ink cartridges. Using or 
attempting to use potentially incompatible 
inks and /or cartridges in your machine may 
cause damage to the machine itself and/or it 
may result in unsatisfactory print quality. Our 
warranty coverage does not apply to any 
problem that was caused by the use of 
unauthorized third party ink and/or cartridges. 
To protect your investment and guarantee 
your print quality please continue to replace 
consumed ink cartridges with only Genuine 
Brother Branded Supplies.

 

1

2

M

brother

XXXX

Detailed Information for Brother MFC-845CW Quick Setup Guide

Lists of information found in Brother MFC-845CW Quick Setup Guide - Page 12

  • DO NOT take out ink cartridges if you do not need to replace them.
  • DO NOT shake the ink cartridges.
  • DO NOT repeatedly insert and remove the cartridges.
  • If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.
  • Once you open an ink cartridge, install it in the machine and use it up within six months of installation.
  • DO NOT dismantle or tamper with the ink cartridge, this can cause the ink to leak out of the cartridge.
  • Brother strongly recommends that you do not refill the ink cartridges provided with your machine.

Related Documents for Brother MFC-845CW Quick Setup Guide