For Wired Network Interface Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition); For Wired Network Interface Users ; Improper Setup- Page 23

Installing the Driver & Software

21

Windows

®

W

ind

ow

s

®

Wi

re

d

Netw

o

rk

For Wired Network Interface Users 
(For Windows

®

 98/98SE/Me/2000 Professional/XP/XP Professional 

x64 Edition)

Important

Make sure that you have finished the 
instructions from Step 1 

Setting Up the 

Machine

 on pages 4 through 15.

1

Unplug the machine from the AC outlet.

2

Using both hands, use the plastic tabs on both 
sides of the machine to lift the scanner cover 
until it locks securely into the open position.

3

Insert the network cable into the LAN socket 
marked with a 

 symbol. You will find the 

LAN socket inside the machine on the left as 
shown below.

4

Carefully route the network cable through the 
trench and out the back of the machine.
Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide 
both cables through the trench with one on top of 
the other.

5

Lift the scanner cover to release the lock ( ).
Gently push the scanner cover support 
down ( ) and close the scanner cover ( ).

6

Turn on the machine by connecting the power 
cord.