Installation when using a Network Print Queue or Share (printer driver only); Standard Installation; Network Shared Printer- Page 121

Appendix A

114

Installation when using a Network Print Queue or Share 

(printer driver only)

A

Note

• You must configure the IP address on your machine before you proceed with this chapter. If you have not 

configured the IP address, see 

Configuring your machine for a network with an Ethernet cable 

connection

on page 9 first.

• Verify the host computer and print server are either on the same subnet, or that the router is properly 

configured to pass data between the two devices.

• Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall 

available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal Firewall 
software.

a

Start the CD-ROM installation menu program according to the Quick Setup Guide.

b

Select the model name and your language (if necessary), and then click 

Install Other Drivers or Utilities

.

c

Click 

Printer Driver (Only)

.

d

Click 

Next

 in response to the Welcome message. Follow the on-screen instructions.

e

Select 

Standard Installation

 and click 

Next

.

f

Select 

Network Shared Printer

, and then click 

Next

.

g

Select your printer’s queue, and then click 

OK

.

Note

Contact your administrator if you are not sure about the location and name of the printer in the network.

h

Click 

Finish

.