Using the control panel to configure your machine for a network; Using other methods to configure your machine for a network; Subnet Mask- Page 19

Configuring your machine for a network with an Ethernet cable connection

12

2

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the 

device will appear as an APIPA device in the BRAdmin Professional utility screen.

• You can find the node name and Ethernet address by printing the Network Configuration List. See 

Printing 

the Network Configuration List

on page 81 for information on how to print the Network Configuration List 

on your print server.

d

Double click the unconfigured device.

e

Enter the 

IP address

, 

Subnet Mask

 and 

Gateway

 (if needed) of your print server.

f

Click 

OK

.

g

With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your machine for a network

2

You can configure your machine for a network using the control panel LAN menu. See 

Control panel 

setup

on page 70.

Using other methods to configure your machine for a network

2

You can configure your machine for a network using other methods. See 

Other ways to set the IP address 

(for advanced users and administrators)

on page 110.