Print Quality Difficulties; Network Difficulties; 12 - 17- Page 178

12 - 17

   TROUBLESHOOTING AND ROUTINE MAINTENANCE

Print Quality Difficulties

Printed pages are curled.

Thin or thick paper below the standard can cause this problem. Make 
sure you select the Paper Type that suits the media type you use. 
(See 

Setting the Paper Type

 and 

Media Type

 in Software User’s Guide 

on the CD-ROM.)

Printed pages are smeared.

The Paper Type setting may be incorrect for the type of print media you 
are using—

OR

—The print media may be too thick or have a rough 

surface. (See 

Setting the Paper Type

 and 

Media Type

 in Software 

User’s Guide on the CD-ROM.)

Printouts are too light.

Set Toner Save mode to off in the Advance tab in the printer driver. 
(See 

Toner Save

 in Software User’s Guide on the CD-ROM.)

Network Difficulties

I cannot print over the Network

Make sure that your MFC is powered on and is On Line and in Ready 
mode. Press the Test switch. Then the current settings of the NC-9100h 
are printed.Verify that the cabling and Network connections are good. If 
possible, try connecting the MFC to a different port on your hub using a 
different cable. Check to see if there is any LED activity. The NC-9100h 
has a two color LED for diagnosing problems.

DIFFICULTY

SUGGESTIONS