Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address; Using BRAdmin Professional utility and the TCP/; IP Protocol to set the IP address- Page 115

11 - 4 TCP/IP CONFIGURATION

5

In the IP Config box, click the Static radio button. 

6

Click OK.

Restart the print server by using BRAdmin Professional utility or Web 
Browser. If you are not sure how to restart the print server, you may 
simply turn the machine’s power switch off, and then switch it on.

Using BRAdmin Professional utility and the TCP/
IP Protocol to set the IP address

If your PC is using the TCP/IP protocol, do the following:

1

Select TCP/IP filter in the left frame of the main window.

2

Select the Device menu and choose the Search Active 
Devices.

3

Select the Devices menu and choose Setup Unconfigured 
Devices.

4

Select the MAC address of your Print/Fax server and click the 
Configure button.

You can find the node name and MAC address by printing out the 
machine configuration page. For information on how to print the 
configuration page on your Print/Fax server, see Resetting the Print/
Fax Sever back to factory settings (Test Switch) on page 13-4.

5

Enter the IP address, Subnet mask and Gateway (if needed) 
of your Print/Fax server.

6

Click OK then select Close.

7

With the correctly programmed IP address, you will see the 
Brother Print/Fax server in the device list.

If the MFC server is set to its factory defalt settings without 
using a DHCP server, the device will appear as APIPA in the 
BRAdmin Professional utility screen.