Subnet Mask; Gateway; Node Name- Page 28

Control Panel Setup

 16

3

Subnet Mask

This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to 
obtain the subnet mask, enter the desired subnet mask. Check with your network manager for the subnet 
mask to use.

1

(For MFC-8460N, MFC-8660DN, MFC-8670DN and MFC-8860DN) Press 

Menu

, 

6

, 

1

, 

3

.

(For DCP-8065DN) Press 

Menu

, 

4

, 

1

, 

3

.

2

Select 

1

 to change. Enter the Subnet Mask address.

3

Press 

OK

.

4

Press 

Stop/Exit

.

Gateway

This field displays the current gateway or router address used by the machine. If you are not using DHCP or 
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a 
gateway or router, leave this field blank. Check with your network manager if you are unsure.

1

(For MFC-8460N, MFC-8660DN, MFC-8670DN and MFC-8860DN) Press 

Menu

, 

6

, 

1

, 

4

.

(For DCP-8065DN) Press 

Menu

, 

4

, 

1

, 

4

.

2

Enter the Gateway address.

3

Press 

OK

.

4

Press 

Stop/Exit

.

Node Name

You can register the machine name on the Network. This name is often referred to as a NetBIOS name; and 
is the name that is registered by the WINS server on your network. Brother recommends the name 
BRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).

1

(For MFC-8460N, MFC-8660DN, MFC-8670DN and MFC-8860DN) Press 

Menu

, 

6

, 

1

, 

5

.

(For DCP-8065DN) Press 

Menu

, 

4

, 

1

, 

5

.

2

Select 

1

 to change. Enter the Node Name.

3

Press 

OK

.

4

Press 

Stop/Exit

.