For Network Interface Users; For Network Interface Users ; Improper Setup- Page 12

Installing the Driver & Software

10

STEP 2

Windows

®

W

ind

ow

s

®

Netw

o

rk

2

For Network Interface Users 

The installation steps for the MFL-Pro Software Suite and drivers will depend on your model number.
Please check the table below for the correct installation method for your model.

For MFC-440CN, MFC-5460CN and MFC-5860CN 
users

Important

Make sure that you have finished the 
instructions from STEP 1 Setting Up the 
Machine in the Quick Setup Guide.

Note

• Please close any applications running before 

installing MFL-Pro Suite.

• If your machine has media drives (slots), make 

sure there are no memory cards in the media drive 
of the machine.

(The illustrations are based on MFC-5460CN.)

1

Turn off and unplug the machine from the AC 
outlet and from your network, if you already 
connected an interface cable.

2

Using both hands, use the plastic tabs on both 
sides of the machine to lift the scanner cover 
until it locks securely into the open position.

3

Insert the network cable into the LAN socket 
marked with a 

 symbol. You will find the 

LAN socket inside the machine on the left as 
shown below.

4

Carefully route the network cable through the 
trench and out the back of the machine.Then, 
connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the 
cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide 
both cables through the trench with one on top of 
the other.

Model Number

Page Number

MFC-440CN, MFC-5460CN, MFC-5860CN

page 10

DCP-8065DN, MFC-7225N, MFC-7820N, MFC-8460N, MFC-8860DN

page 14