For Windows NT® 4.0 users; Installing the TCP/IP protocol; Other sources of information- Page 105

 91

7

6

Close OK. Port Properties dialog appears.

7

Enter the IP address of the printer that you wish to print to and click OK.

For Windows NT

®

 4.0 users

Installing the TCP/IP protocol

If you did not install the TCP/IP protocol during the installation of your Windows NT

®

4.0 system (either 

workstation or server) follow these steps. 

1

Go to the Start button, select Settings, and then Control Panel.

2

Run the Network applet by double clicking the Network icon and then click the Protocols tab.

3

Select Add, and double click TCP/IP Protocol.

4

Insert the requested disk(s), or CD-ROM, to copy the required files.

5

Click Close. The Windows NT

®

4.0 system will review protocol bindings and then you will see the TCP/IP 

Properties dialog.

6

Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system 
manager for these addresses.

7

Click OK to exit (your Windows NT

®

4.0 workstation or server will need to be re-booted).

Other sources of information

See Configuring your network printer on page 9 to learn how to configure the IP address of the printer.