Using the SecureEasySetupTM software to configure your machine for a wireless network; Using the SecureEasySetup; for a wireless network- Page 39

 25

3

Using the SecureEasySetup

TM

 software to configure your machine

for a wireless network

The SecureEasySetup

TM 

software allows you to configure the wireless network easier than configuring it 

manually. By pushing a button on the wireless router or access point, you can complete setup and secure the 
wireless network. Your router or access point must also support SecureEasySetup

TM

. See the user’s guide 

for your wireless LAN router or access point for instructions to configure your machine for a wireless network.

Note

Routers or access points that support SecureEasySetup

TM

 have the SecureEasySetup

TM

 symbol as shown 

below.

1

Place the Brother machine close to your wireless router/access point. (Less than 5 m/16 feet.).

2

Push the SecureEasySetup

TM

 button on your wireless router or access point. See the user’s guide for 

your wireless router or access point for instructions.

3

Press Menu, 6, 2, 2, 2, on the control panel of the Brother machine.

4

The wireless network connection status using SecureEasySetup

TM

 will be displayed; 

Connecting 

WLAN

, 

Connected

 or 

Connection Error

.

Connecting WLAN

 is displayed when the Brother machine is trying to make connections to your router 

or access point. Wait till either 

Connected

 or 

Connection Error

 is displayed.

Connected

 is displayed when the Brother machine is successfully connected to your router or access 

point. You can now use your machine with your wireless network.

Connection Error

 is displayed when the Brother machine has not successfully connected to your 

router or access point. Try starting from Step 1 again. If the same message is displayed again, reset the 
print server back to the default factory settings and try again.

5

Press Stop/Exit.