3. Front Panel Setup; LAN Main Setup Menu; Setup TCP/IP- Page 20

3

3 - 1

3

Front Panel Setup

LAN Main Setup Menu

The control panel LAN menu section can be used to configure network settings.

Press Menu/Set, then press number, 6 for LAN and then proceed to the menu selection you wish to 
configure. 

Please note that the machine is supplied with the BRAdmin Professional Windows

®

 software, which also can 

be used to configure network settings.

Setup TCP/IP

This menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Node Name, WINS 
Config, WINS Server, DNS Server and APIPA.

BOOT Method

1

Press Menu/Set, 6, 1, 1. 

2

Press 

▲

 or 

▼

 to select 

Auto

, 

Static

, 

RARP

, 

BOOTP

 or 

DHCP

.

3

Press Menu/Set.

4

Press Stop/Exit.

Static mode

In this mode the machine’s IP address must be manually assigned. Once entered the IP address is locked to 
the assigned address.

Auto mode

In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server 
is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will 
be used. If no DHCP server is available, the machine will scan for a BOOTP server. If a BOOTP server is 
available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a 
BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not 
answer, the machine will use an APIPA address, see Using APIPA to configure the IP address on page A-3. 
This whole process can take 2 to 3 minutes so we recommend printing a Network Configuration List to confirm 
the network settings are set correctly.