Printer driver already installed; For Windows NT® 4.0 users; Installing the TCP/IP protocol- Page 38

4 - 3

4

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:

1

Select the printer driver you wish to configure.

2

Select File and then Properties.

3

Click the Ports tab of the driver and click Add Port.

4

Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New 
Port... button.

5

The Standard TCP/IP Port Wizard will start. Follow steps 8 to 12 of Printer driver not yet installed on 
page 4-2.

6

Close Add Port and Properties dialog box.

For Windows NT

®

 4.0 users

Windows NT

®

 4.0 users can send print job using Brother Peer-to-Peer Print software provided on the Brother 

CD-ROM supplied with the machine.

Installing the TCP/IP protocol

If you did not install the TCP/IP protocol during the installation of your Windows NT

®

4.0 system (either 

workstation or server) follow these steps. If you have already installed the TCP/IP protocol, proceed to the 
next section, Installing the Brother Peer-to-Peer software on page 4-4.

1

Go to the Start button, select Settings, and then Control Panel.

2

Run the Network applet by double clicking the Network icon and then click the Protocols tab.

3

Select Add, and double click TCP/IP Protocol.

4

Insert the requested disk(s), or CD-ROM, to copy the required files.

5

Click Close. The Windows NT

®

4.0 system will review protocol bindings and then you will see the TCP/IP 

Properties dialog.

6

Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system 
manager for these addresses.

7

Click OK to exit (your Windows NT

®

4.0 workstation or server will need to be re-booted).