䌀䠀䄀一䜀䤀一䜀 吀䠀䔀 䰀䤀䜀䠀吀 䈀唀䰀䈀; The glass plate over the light bulb will be hot after running the machine. Please wait for it to cool; off before changing the light bulbs so you don't burn yourself.- Page 102
Brother PE-300S User's Guide
Table of Contents
99
CHANGING THE LIGHT BULB
CAUTION
The glass plate over the light bulb will be hot after running the machine. Please wait for it to cool
off before changing the light bulbs so you don't burn yourself.
1. Turn the power off.
2. Loosen the screw on the reverse side of sewing head.
Remove the end cap.
1
Screw
2
End cap
3. Replace the snap in the light bulb with a new one.
1
Light bulb
*
Light bulbs are available through your dealer. (8V, 2.4 W/
Parts code X50228001)
CAUTION
Do not use Brother 12V 5W light bulbs designed for use with
this machine (part# XA2037001). Do not use other bulbs. Bulbs
can be purchased at a Brother dealer near you.
4. Set the end cap.
5. Tighten the screw.
1
End cap
2
Screw
1
2
1
1
2
Detailed Information for Brother PE-300S User's Guide
Lists of information found in Brother PE-300S User's Guide - Page 102
- 1. Turn the power off.
- 2. Loosen the screw on the reverse side of sewing head.
- 3. Replace the snap in the light bulb with a new one.
- 2.4 W/ Parts code X50228001) CAUTION Do not use Brother 12V 5W light bulbs designed for use with this machine (part# XA2037001).
- 4. Set the end cap.
- 5. Tighten the screw.
Related Documents for Brother PE-300S User's Guide
All trademarks are property of their respective owners. Tightrope
Interactive