娀䤀倀倀䔀刀 䤀一匀䔀刀吀䤀伀一 ഀ⠀䌀䔀一吀䔀刀䔀䐀 䄀一䐀 匀䤀䐀䔀 䄀倀倀䰀䤀䌀䄀吀䤀伀一⤀; 䌀攀渀琀攀爀攀搀 愀瀀瀀氀椀挀愀琀椀漀渀; Before sewing, gently turn the hand wheel to check the needle position.- Page 59

56

Contents

Setting Up

Basic Sewing

Machine

Operation

Utility Stitches

Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

ZIPPER INSERTION (CENTERED AND SIDE APPLICATION)

I

Preparations:
Attach presser foot “J” and sew straight stitches up to the crotch
end. Change to a basting stitch and sew to the top of the fabric.

1

Crotch end

2

Reverse stitch

3

Basting stitch

Caution
Before sewing, gently turn the hand wheel to check the needle position.
Make sure that the needle does not come down onto the foot, or it could break and cause injury.

1

1

Straight

1. Press the seam allowance open and attach the zipper with a

basting stitch in the middle.

1

Zipper slide

2

Basting

3

Zipper

4

Reverse side

Centered application

2. Attach the I foot (see p. 32).  Turn the needle position adjust-

ment knob on the back of the foot to position the foot so that
the needle comes down over the right side of the foot (as
shown).
(Adjust foot position so the needle is positioned over the right
side of the foot when sewing the left side of the zipper, and
over the left side of the foot when sewing to the right of the
zipper.)

1

Left-Right

2

Loosen

3

Tighten

4

Adjustment screw

5

Needle drop point

5

3

3. Sew with the machine on the right side of the fabric, and then

remove basting.

1

0.7- 1 cm

1

2

3

1

2

3

4

1

2

3

4

5

1

4