5 Connecting PS-9000; Use the network cable to connect ; PS-9000 to the Ethernet hub.- Page 2

 2

US English

5 Connecting PS-9000

1

Use the network cable to connect 
PS-9000 to the Ethernet hub.

2

Connect the AC adapter to PS-9000, and 
then plug the power cable of the P-touch 
and PS-9000 into the electrical outlet.

3

Use the USB cable to connect PS-9000 to 
the P-touch. (PS-9000: Type A connector; 
P-touch: Type B connector)

4

Turn on the P-touch.

6 Setting up PS-9000 and installing the printing software

1

After the CD-ROM is inserted into the 
CD-ROM drive of the computer, the main 
menu dialog box automatically appears.

●

If the main menu dialog box does not 
appear, open My Computer, select the CD-
ROM drive, and then run “autorun.exe“.

2

In the main menu dialog box, click 
[Setup]. The welcome message shown 
below appears. Click [Next].

 Caution

●

The QL-1050N power cord is two 
separate cords. After connecting to the PS-
9000 and the QL-1050N, plug the power 
cord into the socket.

●

The shape of the power cord depends on 
your model.

●

Don't connect the power cord to other 
machines than the specified.

 Note

●

The USB cable has two different types of 
connectors. Be sure to insert the correct 
type of connector into the correct port.

■

USB Cable Connectors

 Note

●

The shape of the power cord depends on 
your model.

Type A

Type B

P-touch

PS-9000

Ethernet HUB

PS9000_setup.book  Page 2  Thursday, August 17, 2006  12:56 PM