Use the network cable to connect ; PS-9000 to the Ethernet hub.; Connect the AC adapter to PS-9000, and - Page 14

 13

1

Use the network cable to connect 
PS-9000 to the Ethernet hub.

2

Connect the AC adapter to PS-9000, and 
then plug the power cable of the P-touch 
and PS-9000 into the electrical outlet.

3

Use the USB cable to connect PS-9000 to 
the P-touch. (PS-9000: Type A connector; 
P-touch: Type B connector)

4

Turn on the P-touch.

Note

●

The USB cable has two different types of 
connectors. Be sure to insert the correct 
type of connector into the correct port.

■

USB Cable Connectors

Type A

Type B

Caution

●

Using an AC adapter other than the one 
supplied with PS-9000 may result in 
damage.

●

Do not connect devices other than a 
P-touch to the PS-9000 USB port.

●

Wait more than 2 seconds between 
connecting and disconnecting the USB 
cable.

●

Do not disconnect the USB cable while 
printing.

Note

●

The shape of the power cord depends on your model.

P-touch

PS-9000

Ethernet HUB