To change the size setting:; SIZE 1; SIZE 2- Page 19

17

The character size can be adjusted using the 

Size

 function. The following table shows the

character sizes.

The default size setting is 

AUTO

. The currently selected size setting is always shown by the

indicator above the display. 

When 6 mm tape is installed and SIZE 3, 4 and 5 is set for horizontal printing or SIZE 2, 4
and 5 is set for vertical printing, the “CHR_SIZE:AUTO?” message will display. Press 

h

 to

print in the 

AUTO

 size.

To change the size setting:

1

While holding down 

f

, press 

1

 once, and keep 

f

 held down to display the

current size setting.

2

While still holding down 

f

, continue pressing 

1

 until the desired size setting is

displayed and is shown by the size indicator.

☞

The current character size setting is also shown by the size indicator above the
display.

3

Release 

f

 to apply the selected size setting to the entire text.

Size

Character

SIZE 1

Standard Size

SIZE 2

Double Width

SIZE 3

Double Height

SIZE 4

Double Width & Double Height

SIZE 5

4 

×

 Width & Double Height

AUTO

1/4” (6 mm) tape: SIZE 1
3/8” to 3/4” (9 mm to 18 mm) tape: SIZE 4

SIZE 1

SIZE 2

SIZE 3

SIZE 4

SIZE 5

Sample

SIZE FUNCTION