Inserting a Tape Cassette; GETTING STARTED- Page 22

16

Inserting a Tape Cassette

GETTING STARTED

Tape cassettes of 0.13", 0.23", 0.35", 0.47" or 0.70" (3.5mm, 6mm, 9mm, 12mm or 18mm) 
width can be used in your P-touch labeler. Use only Brother tape cassettes with the 

mark.

Check that the end of the tape is not bent and 
that it passes through the tape guide. If the 
tape is not passed through, pass it through 
the tape guide referring to the illustration.

After making sure that the power is off, lift open the 
tape compartment cover. If there is already a tape 
cassette in the machine, remove it by pulling it 
straight up.

Inserting a Tape Cassette

• If the new tape cassette has a cardboard stopper, be sure to 

remove the stopper before inserting the cassette.

• If the ink ribbon is loose, use your finger to wind the toothed 

wheel in the direction of the arrow as shown on the tape cassette.

End of tape

Tape guide

1

2