Feeding Tape; Feed function; LCD Display- Page 24

18

Feeding Tape

GETTING STARTED

Feed function

The Feed function feeds 0.98" (25mm) of blank tape.

Hold down the 

Shift

 key and press the 

Preview

 key.

The message "Feeding Tape... Please Wait" appears while the tape is fed.

LCD Contrast

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, 
-1, -2) to make the screen easier to read. The default setting is “0”.

Press the 

Setup

 key to display the Setup menu, select “LCD Contrast” using the 

 or   key, and then press the 

OK

 or 

Enter

 key.

Select a contrast level using the   or   key. 
The screen contrast changes each time you press the   or   key, allowing you 
to set the most suitable contrast.

Press the 

OK

 or 

Enter

 key.

Feeding Tape

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape 

cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon 

to be discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the 

tape to jam.

1
2

To exit or cancel this function press 

Escape

.

LCD Display

1

2

3

• Press  the 

Escape

 key to return to the previous step.

• Pressing the 

Space

 key on the contrast setting screen sets the contrast to the default value “0”.