LABEL PRINTING; Label Preview; Printing a Label- Page 47

41

Label Preview

1

2

3

4

5

6

7

8

9

z

 LA
BEL PRIN

TING

LABEL PRINTING

Using the Preview function you can check the layout of the label before printing.

Press the 

Preview

 key.

An image of the label is displayed on the screen.
The length of the label is shown in the lower-right corner of the screen.
Press the   or   key to scroll the preview to the left or right.
Press the   or   key to change the magnification of the preview.

Labels can be printed once text entry and formatting is complete. Printing options 
include single and multiple copies, sequential numbering and mirror-printing.

Label Preview

1

• Press  the 

Escape

, 

OK

 or 

Enter

 key to return to the text entry screen.

• To scroll the preview to the left or right end, hold down the

 Shift 

key and press the   or   

key.

• To print the label directly from the preview screen, press the 

Print

 key or open the print 

options screen and select a print option. Refer to "Printing a Label" below for details.

• The print preview is a generated image of the label, and may differ from the actual label when 

printed.

Printing a Label

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon 

to be discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the 

tape to jam.

• Be sure to check that there is enough tape remaining when printing several labels 

continuously. If tape is running low, set fewer copies, print labels one at a time, or replace the 
tape cassette.

• Striped tape indicates the end of the tape cassette. If this appears during 

printing, press the 

Power

 key to turn the P-touch labeler off. 

Attempting to print with an empty tape cassette may damage the 
machine.