Adjusting the Label Length; Attaching Labels; LABEL PRINTING- Page 52

LABEL PRINTING

46

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

Press the 

Setup

 key to display the setup menu, select "Adjust Length" using the 

 or   key, and then press the 

OK

 or 

Enter

 key.

Select "Adjust Length" by using the   or   key, and 
then set the value by using the   or   key.

Press the 

OK

 or 

Enter

 key to apply the setting.

If necessary, trim the printed label to the desired shape and length using scissors, etc.

Peel the backing from the label.

Position the label and then press firmly from top to bottom with your finger to 
attach the label.

Chain

• Use this setting when printing several 

labels with minimum margins.

• Feed the tape before using the cutter. 

Otherwise a part of the text may be cut off. 
Do not try to pull the tape since this may 
damage the tape cassette.

•  After pressing Print, “OK to Feed?” 

appears.
Press the 

Escape

 key to enter more texts 

or press the 

OK

 or 

Enter

 key to feed. 

• The final label is printed with an 0.37" (9.4 

mm) margin to the right of the characters. 
Use scissors to cut off any part of this 
margin that is not required.

Setting

Description

Example

ABC

ABC

*Feed the tape before 

using the cutter.

0.37"

(9.4 mm)

Adjusting the Label Length

1

2

3

• Press  the 

Escape

 key to return to the previous step.

• Press  the

 Space

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

Attaching Labels

1
2
3