Select Other; Margin! *; Text - Page 64

TROUBLESHOOTING

58

Error Messages

Select Other
Margin!  *

The tape length set using the tape length setting is shorter 
than the total length of the left and right margins applied for 
the "Large Margin" setting. Select a different margin setting.

Text 
Too Long!  *

The length of the label to be printed using the text entered is 
longer than the length setting. Edit the text to fit within the set 
length or change the length setting.

Text 
Too High!  *

The text size is too large. Select a different size option.

Check # of 
Digits 
Entered!  *

The number of digits entered in the bar code data does not 
match the number of digits set in the bar code parameters. 
Enter the correct number of digits.

Input A,B,C or D 
At Start&End!  *

The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of 
the bar code data for the CODABAR protocol). Enter the bar 
code data correctly.

Maximum Of 
5 Bar Codes 
Per Label!  *

There are already 5 bar codes entered in the text data when 
you try to enter a new bar code. You can only use up to five 
bar codes in each label.

Category Full!  *

The memory available for categories is full. To make more 
memory available, delete any unnecessary registered label 
files by highlighting the label file and pressing the 

OK

 key.

Installed tape is
not compatible with 
this machine!   *

Tape that is incompatible with the machine has been 
installed. Use compatible tape.

OK to Feed?  *

Feeding tape after printing when [Chain print]
is selected. Refer to ”Setting Margin” on page 45.

Message

Cause/Remedy

*Press any key to clear the error message.