AC Adapter; GETTING STARTED- Page 24

18

Power Supply

GETTING STARTED

AC Adapter

Connect the AC adapter directly to the P-touch labeler.

Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V 
on the P-touch labeler.

Insert the AC adapter plug into a standard electrical outlet.

Remove the batteries if you do not intend to use the P-touch for an extended period of time.

1

2

• Turn the P-touch labeler off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.

To safe guard and backup the labeler's memory, when the AC adapter is unplugged it is 
recommended to have AA-size alkaline batteries (LR6) installed into the machine.

WARNING

• Use only the adapter (AD-24), which is designed exclusively for your P-touch. 

Failure to observe this may result in an accident or damage. Brother shall not 
assume any responsibility for any accident or damage resulting from not using the 
specified AC adapter.

• Do not connect the AC adapter to a non-standard electrical outlet. Failure to 

observe this may result in an accident or damage. Brother shall not assume any 
responsibility for any accident or damage resulting from not using a standard 
electrical outlet.

CAUTION

• Disconnect the AC adapter from the P-touch and electrical outlet when you do not 

intend to use the P-touch for an extended period.

• When power is disconnected for more than two minutes, all text and format settings 

will be cleared. Any text files stored in the memory will also be cleared.