Error Messages- Page 73

1

2

3

4

5

6

7

8

9

67

z

 TRO

U

BLESHOOTING

Error Messages

A 1/4" (6 mm) tape cassette is not installed when an Auto-
Format for 1/4" (6 mm) tape is selected. Install a 1/4" (6 mm) 
tape cassette.

A 9/64" (3.5mm) tape cassette is not installed when an Auto-
Format for 9/64" (3.5mm) tape is selected. Install an 9/64" 
(3.5mm) tape cassette.

The maximum number of characters for the selected layout 
have already been entered. Edit the text to use fewer 
characters or use a different layout.

The value entered for setting the tape length, tab length, 
multiple copies, or numbering function is invalid. Enter a valid 
value for the setting.

The tape length set using the tape length setting is shorter than 
the total length of the left and right margins applied for the 
"Large Margin" cutting option. Select a different cutting option.

The length of the label to be printed using the text entered is 
longer than the length setting. Edit the text to fit within the set 
length or change the length setting.

The text size is too large. Select a different size option.

The number of digits entered in the bar code data does not 
match the number of digits set in the bar code parameters. 
Enter the correct number of digits.

The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of 
the bar code data for the CODABAR protocol). Enter the bar 
code data correctly.
There are already 5 bar codes entered in the text data when 
you try to enter a new bar code. You can only use up to five 
bar codes in each label.

Message

Cause/Remedy