Adjusting the Label Length; Attaching Labels; BEL PRIN- Page 61

1

2

3

4

5

6

7

8

9

55

z

 LA
BEL PRIN

TING

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

Press the 

 key to display the setup menu, select 

"Adjust Length" using the   or   key, and then press 
the 

 or    key.

Select "Adjust Length" by using the   or   key, and 
then set the value by using the   or   key.

Press the 

 or   key to apply the setting.

If necessary, trim the printed label to the desired shape and length using scissors, 
etc.

Peel the backing from the label.

Position the label and then press firmly from top to bottom with your finger to 
attach the label.

Adjusting the Label Length

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

Attaching Labels

The backing of some types of tapes may be pre-cut to 
make it easier to peel the backing.

1

2

3

• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven.  The labels may peel 

off easily from these surfaces.

• Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive 

Tapes or other special tapes and observe all precautions noted in the instructions.