Possible Cause; The LCD messages ; are displayed in a - Page 69

1

2

3

4

5

6

7

8

9

63

z

 TRO

U

BLESHOOTING

What to do when...

The LCD messages 
are displayed in a 
foreign language.

Is the language set 
properly?

Refer to “Setting Language 
and Unit” on page 24 and 
select the desired language 
for the LCD messages.

The label is not 
printed correctly.

Is the tape cassette installed 
correctly?

When installing a cassette, 
press firmly until it clicks into 
place.

Is the print head clean?

If not, clean the print head 
using a cotton swab or 
optional print head cleaning 
cassette (TZ-CL4).

Is Cut Option set to Chain or 
No Cut?

When these options are set, 
the tape is not fed after 
printing the label. Check the 
Cut Option setting, or hold 
down the 

 key and press 

the 

 key to feed and cut 

the tape.

The ink ribbon is 
separated from the 
ink roller.

Is the ink ribbon in the tape 
cassette loose, or did you 
pull on the label coming out 
of the tape exit slot?

If the ink ribbon is broken 
replace the tape cassette. If 
not, leave the tape uncut and 
remove the tape cassette, 
then wind the loose ink 
ribbon onto the spool as 
shown in the figure.

Problem

Possible Cause

Recommendation

Spool

Ink ribbon