CONTENTS; Getting Started; For Your Information- Page 2

Brother PT 2300 User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

Getting Started

For Your Information

GENERAL DESCRIPTION

KEYBOARD & LCD DISPLAY

GENERAL PRECAUTIONS

1 Remove the battery compartment cover on the back of the machine.

2 If batteries are already installed, remove them.

3 Insert eight new AA alkaline batteries, making sure that their poles point in the correct direc...

4 Attach the battery compartment cover.

OPTIONAL AC ADAPTOR

1 Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right side of t...

2 Insert the plug on the adaptor into the nearest standard electrical outlet.

1 Lift open the tape compartment cover. The installed cassette is also released.

2 If a tape cassette is already installed, remove it by pulling it straight up.

3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed whee...

4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back of ...

5 Close the compartment cover, then turn on the machine if it is off.

6 Hold down c and press _ once to advance the tape and remove any slack.

CONNECTING THE P-TOUCH TO A COMPUTER

1 Insert the flat (A) connector on the USB cable into the USB port on the computer.

2 Insert the square (B) connector on the USB cable into the USB port on the right side of the P-t...

3 Turn on the P-touch.

INSTALLING P-TOUCH EDITOR

On an IBM PC-Compatible Computer

1 Check that your system configuration meets the following requirements.

2 Insert the P-touch Editor Version 3.1 CD- ROM into the computer’s CD-ROM drive. A dialog box au...

3 Click the top button (P-touch Editor). The InstallShield® Wizard for installing the P-touch Edi...

4 Carefully read the contents of the dialog box, and then click the Next button to continue. The ...

5 Type the necessary information into the appropriate boxes (If the information has already been ...

6 Click the Yes button to register the entered information. The Setup Type dialog box appears.

7 Select the installation method, and then click the Next button.

8 After P-touch Editor is installed, a dialog box appears, allowing you to select whether or not ...

1 Click the Next button. A dialog box appears, instructing you to connect the PT-2300/2310 to the...

2 Connect the PT-2300/2310 to the computer using a USB interface cable as described on page6, an...

3 Click the Finish button. A dialog box appears, showing that the installation is finished.

4 Select “Yes, I want to restart my computer now.”, click the Finish button to restart the comput...

1 In the dialog box that appears, informing you that the PT-2300/2310 printer driver will be inst...

2 After the dialog box appears, instructing you to connect the P-touch 2300/2310 and turn it on, ...

3 In the first Found New Hardware Wizard dialog box that appears, select “Install the software au...

4 If a dialog box warning appears indicating that the software has not passed Windows Logo testin...

5 In the Found New Hardware Wizard dialog box that appears, indicating that installation of the P...

6 In the dialog box that appears, indicating that installation is finished, select “Yes, restart ...

7 Remove the CD-ROM from the computer.

1 Start up Windows Explorer.

2 Select the CD-ROM drive.

3 Double-click “Main.htm” in the Manual folder within the P-touch folder on the CD- ROM.

1 Click the Start button in the taskbar to display the Start menu.

2 Select “Programs”.

3 Select “P-touch Editor 3.1”.

4 Click “The User’s Guide P-touch Editor Ver 3.1”.

1 Turn off the PT-2300/2310, and then disconnect it from the computer.

2 Insert the P-touch Editor Version 3.1 CD-ROM into the computer’s CD-ROM drive. A dialog box aut...

3 Click the bottom button (Printer driver). A Driver Setup dialog box appears, allowing you to se...

4 Select the desired operation, and then click the Next button.

5 If “Replace with new Brother PT-2300/ 2310” or “Add Brother PT-2300/2310” was selected: With Wi...

On a Macintosh Computer

1 Check that your system configuration meets the following requirements.

2 Connect the PT-2300/2310 to the Macintosh using a USB interface cable. Be sure to leave the PT-...

3 Turn on the Macintosh.

4 Insert the P-touch Editor Version 3.1 CD-ROM into the computer’s CD-ROM drive.

5 Double-click the P-touch Editor 3.1 Installer icon in the folder that appears.

6 After the installer starts up, select the installation method.

7 When the installation is finished and the following dialog box appears, click the Quit button.

8 When the dialog box appears, asking if you wish to restart the computer, click the Restart butt...

1 Turn on the PT-2300/2310.

2 Pull down the Apple menu and select “Chooser” to display the Chooser window.

3 In the list on the left, click the PT-2300/ 2310 icon. Then, select the appropriate printer fro...

4 Close the Chooser window to confirm your settings.

1 Drag the P-touch Editor Ver 3.1 folder to the Trash icon.

2 In the System Folder, open the Extensions folder.

3 Drag the PT-2300/2310 icon and the USB PT-2300/2310 Extension icon to the Trash icon.

4 In the System Folder, open the Preferences folder.

5 Drag the PT-2300/2310 Prefs icon to the Trash icon.

STARTING P-TOUCH EDITOR

On an IBM PC-Compatible Computer

1 Click the Start button in the taskbar to display the Start menu.

2 Select “Programs”.

3 Select “P-touch Editor 3.1”.

4 Click “P-touch Editor 3.1”.

1 Start up Windows Explorer.

2 Select the drive and directory where P-touch Editor is installed.

3 Double-click “Ptedit3.exe”.

On a Macintosh Computer

1 Click (Text button) on the draw toolbar. Text can be typed in, and the pointer changes from (se...

2 Move the I-beam pointer to the position in the layout area where you wish to type in text, and ...

3 The cursor flashes in the layout area to indicate that you can now type in text.

4 Use the computer keyboard to type in the text.

5 To create a new line of text, press the keyboard’s Enter key.

ATTACHING LABELS

1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your...

2 Pass the tape halfway through the long narrow hole in the stick.

3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown b...

4 Peel off the label backing.

PRINT HEAD & ROLLERS

1 Turn off the machine.

2 Open the tape compartment cover, then remove the tape cassette if one is installed. The print h...

3 Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down motion. Rol...

4 Install a tape cassette, close the tape compartment cover, and then try printing again.

5 If a blank streak still appears in the label, repeat steps 3 and 4 using a cotton swab dipped i...

CODE, ALT & SHIFT KEYS

1 Hold down c and press s. The Caps indicator on the left side of the display comes on.

2 Press the keys of the desired letters or symbols.

3 To exit Caps mode, hold down c and press s. The Caps indicator goes off.

1 Hold down c and press W once. The current tab length is displayed.

2 Press h or e until the desired length is displayed or use the number keys to type in the length.

1 Hold down c and press W once.

2 Press e until 1.0 is displayed.

1 Press f, w, h or e to position the cursor below the character immediately to the right of the c...

2 Press * once.

1 Press f, w, h or e to position the cursor below the character immediately to the right of the l...

2 Hold down * until all of the characters that you wish to delete are deleted.

LINE OUT FUNCTION

1 Press f, w, h or e to position the cursor within the line of text that you wish to delete.

2 Hold down c and press 0 once.

1 Hold down c and press *.

2 Press h or e until TXT&FORMAT is selected (flashing).

1 Hold down c and press *.

2 Press h until TXT&FORMAT is flashing.

1 Hold down c and press *.

2 Press h or e until TEXT ONLY is selected (flashing).

1 Hold down c and press *.

2 Press e until TEXT ONLY is flashing.

ACCENT FUNCTION

1 Hold down c and press A. The message “ACCENT a – u / A – U?” appears on the display.

2 Press the key of the letter in the desired accented character.

3 Press f or w until the desired accented character appears enlarged within the frame in the midd...

4 Press r. The accented character is added to the text.

1 Hold down c and press A.

2 Hold down s and press E.

3 Press w until É appears in the frame.

SYMBOL FUNCTION

1 Hold down c and press a. A row of symbols appear in the display.

2 Press h or e to display different rows of symbols and press f or w until the desired symbol app...

3 Press r. The symbol is added to the text.

1 Hold down c and press a.

2 Press h or e until the row containing “” appears, then press f or w until “” appears in the frame.

AUTO FORMAT FUNCTION

1 Hold down c and press Y once. The currently selected setting appears in the display.

2 Press h or e to select the desired setting.

3 Press r to apply the selected setting.

1 Hold down c and press Y.

2 Press h or e until the AUDIO CASSETTE setting is displayed.

1 Type in the text, and then insert a medium (3/4” (18-mm)-wide) or a large (1” (24-mm)- wide) st...

2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the display.

3 Press r. The text is automatically formatted for the installed stamp: centered within the prese...

4 Press p to cut the text out of the stamp stencil film.

5 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film a...

1 Enter the text and insert a stamp film cassette in the tape compartment.

2 Hold down c and press U.

4 Press p to engrave the stamp stencil film, and then automatically cut off.

5 Remove the stamp frame from around the stamp film holder ink pad, one side at a time, then remo...

6 With the glossy side of the stamp stencil film upward, align one of its ends with the slit on t...

7 Hold the end of the stamp stencil film in place with your thumb, then pass the tape through the...

8 Fold the other end of the stamp stencil film over the other side of the stamp film holder and h...

9 Fit the stamp frame over the stamp stencil film and push it into place.

0 Insert the stamp film holder straight into its cap.

1 While holding down c, press 1 once, and keep c held down to display the current font setting.

2 While still holding down c, continue pressing 1 until the desired font setting is displayed.

3 Release c to apply the selected font setting to the entire text.

1 While holding down c, press 1 once, and keep c held down.

2 While still holding down c, continue pressing 1 until FONT 2 is displayed.

SIZE & WIDTH FUNCTIONS

1 While holding down c, press 2 once, and keep c held down to display the current size setting.

2 While still holding down c, continue pressing 2 until the desired size setting is displayed.

3 Release c to apply the selected size setting to the entire text.

1 While holding down c, press 2 once, and keep c held down.

2 While still holding down c, continue pressing 2 until 24 is displayed.

1 While holding down c, press 3 once, and keep c held down to display the current width setting.

2 While still holding down c, continue pressing 3 until the desired width setting is displayed.

3 Release c to apply the selected width setting to the entire text.

1 While holding down c, press 3 once, and keep c held down.

2 While still holding down c, continue pressing 3 until WIDE is displayed.

1 While holding down c, press 4 once, and keep c held down to display the current style setting.

2 While still holding down c, continue pressing 4 until the desired style setting is displayed.

3 Release c to apply the selected style setting to the entire text.

1 While holding down c, press 4 once, and keep c held down.

2 While still holding down c, continue pressing 4 until I+SHAD is displayed.

UNDERLINE FUNCTION

1 While holding down c, press 5 once, and keep c held down to display the current underline setting.

2 While still holding down c, continue pressing 5 until the desired underline setting is displayed.

3 Release c to apply the selected underline setting to the entire text.

1 While holding down c, press 5 once, and keep c held down.

2 While still holding down c, continue pressing 5 until UNDL ON is displayed.

1 While holding down c, press 6 once, and keep c held down to display the current frame setting.

2 While still holding down c, continue pressing 6 until the desired frame setting is displayed.

3 Release c to apply the selected frame setting to the entire text.

1 While holding down c, press 6 once, and keep c held down.

2 While still holding down c, continue pressing 6 until the candy frame is displayed.

TAPE MARGIN FUNCTION

1 While holding down c, press E once, and keep c held down to display the current tape margin set...

2 While still holding down c, continue pressing E until the desired tape margin setting is displa...

3 Release c to apply the selected tape margin setting to the entire text.

1 While holding down c, press E once, and keep c held down.

2 While still holding down c, continue pressing E until HALF is displayed.

HORIZONTAL ALIGNMENT FUNCTION

1 While holding down c, press R once, and keep c held down to display the current horizontal alig...

2 While still holding down c, continue pressing R until the desired horizontal alignment setting ...

3 Release c to apply the selected horizontal alignment setting to the entire text.

1 While holding down c, press R once, and keep c held down.

2 While still holding down c, continue pressing R until RIGHT is displayed.

MIRROR PRINTING FUNCTION

1 While holding down c, press p once, and keep c held down to display the current mirror printing...

2 While still holding down c, continue pressing p until the desired mirror printing setting is di...

3 Release c to apply the selected mirror printing setting to the entire text.

1 While holding down c, press p once, and keep c held down.

2 While still holding down c, continue pressing p until ON is displayed.

LENGTH FUNCTION

1 While holding down c, press T once, and keep c held down to display the current length of the l...

2 While still holding down c, continue pressing T until the desired label length setting is displ...

3 Release c. If ON was selected, the current label length setting is displayed.

4 Press h or e to select the desired length or use the number keys to enter a length.

1 While holding down c, press T once, and keep c held down.

2 While still holding down c, continue pressing T until ON is displayed.

4 Press h until 5.0inch is displayed.

AUTO CUT FUNCTION

1 While holding down c, press Z once, and keep c held down to display the current auto cut setting.

2 While still holding down c, continue pressing Z until the desired auto cut setting is displayed.

3 Release c to apply the selected auto cut setting.

1 While holding down c, press Z once, and keep c held down.

2 While still holding down c, continue pressing Z until ON is displayed.

FEED & CUT FUNCTION

NUMBERING FUNCTION

1 Press f, w, h or e to position the cursor below the number that you wish to increase.

2 Hold down c and press O. The message “NUMBER UNTIL” appears in the display with the current set...

3 Press a number key between 1 and 9 (or press h or e) to select the last number that is to be pr...

4 Press p (or r) to begin printing the labels. The number of each copy is displayed while it is b...

1 Position the cursor below “1”.

2 Hold down c and press O.

4 Press p (or r).

REPEAT PRINTING FUNCTION

1 Hold down c and press I. The message “COPIES” appears in the display with the current setting.

2 Press a number key between 1 and 9 (or press h or e) to select the number of copies that are to...

3 Press p (or r) to begin printing the labels. The number of each copy is displayed while it is ...

1 Hold down c and press I.

3 Press p (or r).

MEMORY FUNCTIONS

1 Hold down c and press 7. The message “STORE” appears on the display with the currently selected...

2 Press a number key (or press h or e) to select the file number where you wish to store the text.

3 Press r. The text is stored under the selected file number and the text previously shown in the...

1 Hold down c and press 8. The message “RECALL” appears on the display with the file number and b...

2 Press a number key (or press h or e) to select the file number containing the text that you wis...

3 Press r. Any text previously entered in the display is erased and the text stored under the sel...

1 Hold down c and press 9. The message “CLEAR” appears on the display with the file number and be...

2 Press a number key (or press h or e) to select the file number containing the text that you wis...

3 Press r. The message “OK TO CLEAR?” appears.

4 Press r to delete the text file that was selected.

1 Hold down c and press 7.

1 Hold down c and press 8.

1 Hold down c and press 9.

TROUBLESHOOTING

ERROR MESSAGE LIST

ACCESSORIES (For USA Only)

PT-2300/2310 CONTACT INFORMATION (For USA Only)

Service Center Locations

Operational Assistance

Assistance on the Internet

Accessories and Supplies

Fax-Back System

P-TOUCH ACCESSORY ORDER FORM (For USA Only)

PT-2300/2310 CONTACT INFORMATION (For USA Only)

Service Center Locations

Operational Assistance

Assistance on the Internet

Accessories and Supplies

Fax-Back System

P-TOUCH ACCESSORY ORDER FORM (For USA Only)

PT-2300BOOKES.pdf

Cabezal de impresión

Cabezal de impresión

CUIDADOS Y PRECAUCIONES GENERALES

1 Extraiga la cubierta del compartimiento de las pilas de la parte posterior de la máquina.

2 Si ya hay pilas instaladas, extráigalas.

3 Inserte ocho pilas alcalinas AA nuevas, asegurándose de que sus polos queden orientados en la d...

4 Coloque la cubierta del compartimiento de las pilas.

ADAPTADOR DE CA OPCIONAL

El adaptador de CA (modelo AD-60) le permite emplear esta máquina siempre que disponga de una tom...

1 Inserte el conector del adaptador que tiene la marca DC IN 9.5V al lado derecho de la máquina.

2 Inserte la clavija del adaptador de CA en la toma de corriente más cercana.

CASETES DE CINTA

Un casete de TZ se suministra con la unidad. Sin embargo, para esta máquina hay disponibles una a...

Además, este equipo ha sido diseñado para permitirle cambiar los casetes de cinta rápida y fácilm...

1 Levante la cubierta del compartimiento de la cinta para abrirla. Se libera también entonces el ...

2 Si ya hay un casete instalado, extráigalo tirando del mismo recto hacia arriba.

3 Si la cinta entintadora del otro casete se afloja, utilice un dedo para bobinar la rueda dentad...

4 Inserte firmemente el casete de cinta en el compartimiento de la cinta asegurándose de que toda...

5 Cierre la cubierta del compartimiento y conecte la alimentación de la máquina si estaba descone...

6 Mantenga pulsada c y presione _ una vez para que la cinta avance y así quede con la tensión ópt...

CONEXIÓN DE LA P-TOUCH A UN PC

Esta máquina dispone de un puerto USB, que le permite conectar la P-touch a su PC compatible con ...

1 Inserte el conector plano (A) del cable USB en el puerto USB del PC.

2 Inserte el conector cuadrado (B) del cable USB en el puerto USB del lado derecho de la P-touch.

3 Encienda la P-touch.

INSTALACIÓN DEL P-TOUCH EDITOR

El software P-touch Editor añade aún más ilustraciones y funciones de diseño a las posibilidades ...

En un PC compatible con IBM

1 Compruebe que la configuración de su sistema satisface los siguientes requisitos.

PC: PC IBM o compatible Sistema operativo: Microsoft® Windows® 98, 98SE, ME, 2000 Prefessional o ...

Memoria disponible: Como mínimo 32 MB Monitor: VGA o tarjeta de gráficos superior Puerto USB Unid...

2 Introduzca el CD-ROM del P-touch Editor Version 3.1 en la unidad de CD-ROM del PC. Aparecerá un...

3 Haga clic sobre el botón superior (P-touch Editor). Se iniciará el asistente “InstallShield® Wi...

4 Lea atentamente el contenido del cuadro de diálogo y a continuación haga clic sobre el botón “N...

5 Ingrese la información necesaria en los cuadros apropiados (Si la información ya ha sido regist...

6 Haga clic sobre el botón “Yes” para registrar la información ingresada. Aparecerá un cuadro de ...

7 Seleccione el método de instalación y a continuación haga clic sobre el botón “Next”.

• Para una Instalación “Typical” o “Compact”

Seleccione “Typical” o “Compact”, y a continuación haga clic sobre el botón “Next”, comenzará inm...

Typical: Se instalan todas las opciones básicas (P-touch Editor Version 3.1, clips de arte, plant...

Compact: Solamente se instala el P-touch Editor Version 3.1.

• Para una Instalación “Custom”

Al seleccionar “Custom”, y a continuación hacer clic sobre el botón “Next”, aparecerá un cuadro d...

1) Seleccione las opciones que quiera instalar.

Editor: El software P-touch Editor Version 3.1

Clip Art: Las ilustraciones para la función Clip Art del P-touch Editor Version 3.1

Font: Las 13 fuentes

Auto Format Templates:

Las plantillas para la función de autoformato

User’s Guide: La Guía de Usuario (HTML) para el P-touch Editor Version 3.1 (La Guía de Usuario ta...

Help: Los archivos de ayuda para el P-touch Editor Version 3.1

Si se puede hacer clic sobre el botón “Change” mientras se selecciona una opción, se podrán selec...

2) Haga clic sobre el botón “Next” para comenzar la instalación.

8 Después de instalar el P-touch Editor, aparecerá un cuadro de diálogo que le permitirá seleccio...

Para instalar el controlador de impresora, haga clic sobre el botón “Yes”. Aparecerá el primer cu...

Continúe con el procedimiento “Para instalar el controlador de impresora USB” de más adelante.

Si el controlador de impresora ya está instalado, haga clic sobre el botón “No”, reinicie el PC, ...

Con Plug-and-Play, el PC detecta los nuevos dispositivos conectados al sistema, y sus controlador...

1 Haga clic sobre el botón “Next”. Aparecerá un cuadro de diálogo indicándole que conecte la PT-2...

2 Conecte la PT-2300/2310 al PC utilizando el cable de interface USB suministrado como se describ...

3 Haga clic sobre el botón “Finish”. Aparecerá un cuadro de diálogo mostrándole que la instalació...

4 Seleccione “Yes, I want to restart my computer now”, haga clic sobre el botón “Finish” para rei...

1 En el cuadro de diálogo que aparece, informándole de que se va a instalar el controlador de imp...

2 Cuando aparezca el cuadro de diálogo, indicándole que conecte la P-touch 2300/ 2310 y que la en...

3 En el primer cuadro de diálogo “Found New Hardware Wizard” que aparece, seleccione “Install the...

4 Si aparece un cuadro de diálogo de aviso indicando que el software no ha pasado la prueba del l...

5 En el cuadro de diálogo “Found New Hardware Wizard” que aparece, indicando que la instalación d...

6 En el cuadro de diálogo que aparece, indicando que la instalación del PT-2300/2310 ha finalizad...

7 Extraiga el CD-ROM del PC.

La Guía de usurario del P-touch Editor puede leerse introduciendo el CD-ROM en la unidad cada vez...

1 Inicie el Windows Explorer.

2 Seleccione la unidad de CD-ROM.

3 Haga doble clic sobre “Main.htm” en la carpeta “Manual” que hay dentro de la carpeta “Ptouch” d...

1 Haga clic sobre el botón “Start” en la barra de tareas para visualizar el menú de inicio.

2 Seleccione “Programs”.

3 Seleccione “P-touch Editor 3.1”.

4 Haga clic sobre “The User’s Guide P-touch Editor Ver 3.1”.

1 Apague la PT-2300/2310, y después desconéctela del PC.

2 Introduzca el CD-ROM del P-touch Editor Version 3.1 en la unidad de CD-ROM del PC. Aparecerá un...

3 Haga clic sobre el botón inferior (Printer Driver). Aparecerá un cuadro de diálogo “Driver Setu...

4 Seleccione la operación deseada y a continuación haga clic sobre el botón “Next”.

5 Si se seleccionó “Replace with new Brother PT- 2300/2310” o “Add Brother PT-2300/2310”: Con Win...

Conecte la PT-2300/2310 al PC utilizando el cable de interface USB suministrado como se describe ...

Seleccione “Yes, restart immediatelly” y a continuación haga clic sobre el botón “Finish” para re...

Con Windows® XP:

En el primer cuadro de diálogo “Found New Hardware Wizard” que aparece, seleccione “Install the s...

Si aparece un cuadro de diálogo de aviso indicando que el software no ha pasado la prueba del log...

En el cuadro de diálogo “Found New Hardware Wizard” que aparece, indicando que la instalación del...

En el cuadro de diálogo que aparece, indicando que la instalación ha finalizado, seleccione “Yes,...

Extraiga el CD-ROM del PC.

Si se seleccionó “Delete Brother PT-2300/2310”:

Aparecerá un cuadro de diálogo pidiéndole que confirme que quiere eliminar todos los controladore...

Haga clic sobre el botón “Yes”. Aparecerá un cuadro de diálogo mostrándole que los controladores ...

En un PC Macintosh

La versión Mac del software es para un Mac con sistema operativo en inglés. Si el software es ins...

1 Compruebe que la configuración de su sistema satisface los siguientes requisitos.

PC: Macintosh, Power Macintosh o iMac

Sistema operativo: Mac OS 8.6 o posterior

* Este software solamente es compatible con Mac OS X clásico.

Espacio libre en el disco duro: Como mínimo 20 MB

Espacio libre de memoria disponible: Como mínimo 24 MB

Unidad de CD-ROM

* La aplicación se suministra en un CD-ROM; por lo tanto, el PC deberá estar equipado con una uni...

2 Conecte la PT-2300/2310 al Macintosh utilizando un cable de interface USB. Asegúrese de dejar l...

3 Encienda el Macintosh.

4 Introduzca el CD-ROM del P-touch Editor version 3.1 en la unidad de CD-ROM del PC.

5 Haga doble clic sobre el icono “P-touch Editor 3.1 Installer” en la carpeta que aparece.

6 Después de iniciarse el instalador, seleccione el método de instalación.

• Para una Instalación Básica

Al hacer clic sobre el botón “Install” comenzará inmediatamente la instalación de las opciones má...

Para comenzar la instalación se necesitan unos 20 MB de espacio libre en el disco duro. Para pode...

• Para una Instalación Personalizada

Al hacer clic sobre el botón “Custom Install” se visualizará un cuadro de diálogo que le permitir...

Seleccione solamente las opciones que quiera instalar y a continuación haga clic sobre el botón “...

7 Cuando termine la instalación y aparezca el siguiente cuadro de diálogo, haga clic sobre el bot...

8 Cuando aparezca el cuadro de diálogo, preguntándole si quiere reiniciar el PC, haga clic sobre ...

1 Encienda la PT-2300/2310.

2 Despliegue el menú Apple y seleccione “Chooser” para visualizar la ventana “Chooser”.

3 En la lista de la izquierda, haga clic sobre el icono “PT-2300/2310”. Después, seleccione la im...

4 Cierre la ventana “Chooser” para confirmar su configuración.

La Guía de usurario del P-touch Editor puede leerse introduciendo el CD-ROM en la unidad cada vez...

1 Arrastre la carpeta P-touch Editor Ver 3.1 hasta el icono “Trash“.

2 En la carpeta “System Folder”, abra la carpeta “Extensions”.

3 Arrastre el icono “PT-2300/2310” y el icono “USB PT-2300/2310 Extensión” hasta el icono “Trash”.

4 En la carpeta “System Folder”, abra la carpeta “Preferences”.

5 Arrastre el icono “PT-2300/2310 Prefs” hasta el icono “Trash”.

INICIO DEL P-TOUCH EDITOR

La aplicación P-touch Editor facilita a cualquier usuario el diseño y la impresión de etiquetas p...

En un PC compatible con PC de IBM:

1 Haga clic sobre el botón “Start” en la barra de tareas para visualizar el menú de inicio.

2 Seleccione “Programs”.

3 Seleccione “P-touch Editor 3.1”.

4 Haga clic sobre “P-touch Editor 3.1”.

1 Active el explorador de Windows.

2 Seleccione la unidad y el directorio donde haya instalado el P-touch Editor.

3 Haga doble clic sobre “Ptedit3.exe”.

Una vez iniciado el P-touch Editor, se visualizará la pantalla siguiente.

Barra de título

Una vez inicializado el P-touch Editor, se visualizará la pantalla siguiente.

Barra de estado

Aunque las pantallas mostradas en las siguientes explicaciones son para Windows® 95/98/ 98SE/Me, ...

Las propiedades deseadas se pueden visualizar haciendo clic sobre el icono de las mismas en el si...

Icono de propiedades de página

Haga clic sobre un icono para visualizar sus propiedades.

Haga clic sobre este botón para ocultar las propiedades.

Aunque las pantallas mostradas en las siguientes explicaciones son para Windows® 95/98/ 98SE/Me, ...

1 Haga clic sobre el botón (Texto) de la barra de herramientas de dibujo. El texto podrá ahora se...

2 Mueva el puntero en forma de I hasta la posición del área de diseño donde quiera introducir tex...

3 El cursor parpadeará en el área de diseño para indicar que ahora puede introducir texto.

4 Utilice el teclado del PC para introducir el texto.

5 Para crear una nueva línea de texto, presione la tecla Enter del teclado.

Notas sobre el uso

Tenga en cuenta lo siguiente cuando utilice el P-touch Editor Version 3.1 para imprimir códigos d...

Para más detalles, consulte la guía de usuario “User’s Guide” suministrada en el CD-ROM del P-tou...

COLOCACIÓN DE ETIQUETAS

La varilla suministrada permite que, en las cintas laminadas, usted pueda extraer facilmente el p...

1 Tome la cinta con la mano izquierda, con la superficie impresa arriba, y tome la varilla con la...

2 Pase la mitad de la cinta por el orificio estrecho largo de la varilla.

3 Gire tres cuartos de vuelta la varilla hacia usted y separe la varilla de usted como se muestra...

4 Quite el papel del dorso de la etiqueta.

La cinta de tela se emplea para adherir un trozo de tela impresa con el texto en la prendar de ve...

Consulte las página34 para encontrar la explicación detallada sobre el empleo de cintas de membr...

CABEZA DE IMPRESIÓN Y RODILLOS

De vez en cuando, el polvo se adhieren al cabezal de impresión y a los rodillos del el equipo. Su...

Por lo tanto, al igual que con las grabadoras de cintas, la cabeza del equipo deberá limpiarse de...

1 Desconecte la alimentación del equipo.

2 Abra la cubierta del compartimiento de la cinta, extraiga el casete, si está dentro. La cabeza ...

3 Cabezal de impresión: Emplee un palillo con punta de algodón seco para frotar con cuidado la ca...

4 Instale un casete de cinta, cierre la cubierta del compartimiento de la cinta, y después pruebe...

5 Si todavía aparece una franja en blanco en la etiqueta, repita los pasos 3 y 4 utilizando un pa...

Si no funciona nada de lo de arriba, póngase en contacto con el representante de servicio.

TECLA DEL CURSOR

TECLAS CODE, ALT Y SHIFT

1 Mantenga presionado c y presione s. El indicador de Caps, de la izquierda del visualizador, se ...

2 Presione las teclas de las letras o símbolos dedcados.

3 Para salir del modo Caps, mantenga presionado c y presione s. Se apagará el indicador de Caps.

TECLA DE RETORNO

1 Mantenga pulsada c y presione W una vez. Se visualizará la longitud de tabulación actual.

2 Presione h o e hasta que se visualice la longitud deseada, o utilice las teclas numéricas para ...

TECLA DE BORRADO (DEL)

1 Presione f, w, h o e para situar el cursor debajo del carácter que está inmediatamente a la der...

2 Presione * una vez.

1 Presione f, w, h o e para situar el cursor debajo del carácter que está inmediatamente a la der...

2 Mantenga presionado * hasta que se hayan borrado todos los caracteres que usted deseaba borrar.

FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT)

1 Presione f, w, h o e para situar el cursor dentro de la línea del texto que usted desee borrar.

2 Mantenga presionado c y presione 0 una vez.

FUNCIÓN DE REPOSICIÓN (CLEAR)

1 Mantenga presionado c y presione *.

2 Presione h o e hasta que se seleccione TXT&FORMAT (parpadeando).

FUNCIÓN DE ACENTOS

1 Mantenga presionado c y presione A. Aparecerá el mensaje “ACCENT a - u / A - U?” en el visualiz...

2 Presione la tecla de la letra acentuada deseada.

3 Presione f o w hasta que aparezca el carácter acentuado deseado ampliado dentro del recuadro en...

4 Presione r. El carácter acentuado será añadido al texto.

FUNCIÓN DE SÍMBOLOS

1 Mantenga presionado c y presione a. Aparecerá una fila símbolos en el visualizador.

2 Presione h o e para visualizar diferentes filas de símbolos y presione f o w hasta que aparezca...

3 Presione r. El símbolo será añadido al texto.

FUNCIÓN DE FORMATO AUTOMÁTICO

1 Mantenga pulsada c y presione una vez Y. El ajuste actualmente seleccionado parecerá en el visu...

2 Pulse h o e para seleccionar el ajuste deseado.

3 Presione r para aplicar el ajuste seleccionado.

FUNCIÓN DE SELLOS

1 Escriba el texto, y después inserte un casete de película de membretes de tamaño medio (3/4” (1...

2 Mantenga presionado c y presione U una vez. Aparecerá el mensaje “STAMP FORMAT?” en el visualiz...

3 Presione r. El texto se formateará automáticamente para el membrete instalado: centrado dentro ...

4 Presione p para separar el texto del cliché de membrete.

5 Después de haber cortado la película matriz de sellos, extraiga el papel del dorso del cliché d...

1 Extraiga el marco del membrete de entorno al lado al tampón de tinta del soporte de películas d...

2 Con el lado brillante del cliché del membrete encarado hacia arriba, alinee uno de sus extremos...

3 Retenga el extremo del cliché del membrete en su lugar con el dedo pulgar, y pase la cinta por ...

4 Pliegue el otro extremo del cliché del membrete por en otro lado del soporte de películas de me...

5 Adapte el marco del membrete encima del cliché del membrete y presiónelo a su lugar.

6 Inserte el soporte de películas de membrete recto en su tapa.

FUNCIÓN DEL TIPO DE CARACTERES

1 Manteniendo presionada c, pulse una vez 1, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 1 hasta que se visualice el tipo de ca...

3 Para aplicar el ajuste de tipo de caracteres seleccionado a todo el texto, suelte c.

FUNCIONES DE TAMAÑO Y DE ANCHURA

1 Manteniendo presionada c, pulse una vez 2, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 2 hasta que se visualice el tamaño act...

3 Para aplicar el ajuste de tamaño seleccionado a todo el texto, suelte c.

1 Manteniendo presionada c, pulse una vez 3, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 3 hasta que se visualice el ancho actu...

3 Para aplicar el ajuste de ancho seleccionado a todo el texto, suelte c.

FUNCIÓN DE ESTILO

1 Manteniendo presionada c, pulse una vez 4, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 4 hasta que se visualice el estilo act...

3 Para aplicar el ajuste de estilo seleccionado a todo el texto, suelte c.

FUNCIÓN DE SUBRAYADO

1 Manteniendo presionada c, pulse una vez 5, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 5 hasta que se visualice el subrayado ...

3 Para aplicar el ajuste de subrayado seleccionado a todo el texto, suelte c.

FUNCIÓN DE MARCOS

1 Manteniendo presionada c, pulse una vez 6, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando 6 hasta que se visualice el marco actu...

3 Para aplicar el ajuste de marco seleccionado a todo el texto, suelte c.

FUNCIÓN DE CINTA

1 Manteniendo presionada c, pulse una vez E, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando E hasta que se visualice la cinta actu...

3 Para aplicar el ajuste de la cinta seleccionado a todo el texto, suelte c.

FUNCIÓN DE LA ALINEACIÓN HORIZONTAL

1 Manteniendo presionada c, pulse una vez R, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando R hasta que se visualice la alineación...

3 Para aplicar el ajuste de la alineación seleccionado a todo el texto, suelte c.

FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO

1 Manteniendo presionada c, pulse una vez p, y mantenga presionada c para hacer que se visualice ...

2 Siguiendo manteniendo presionada c, continúe presionando p hasta que se visualice la impresión ...

3 Para aplicar el ajuste de la impresión en modo espejo seleccionado a todo el texto, suelte c.

FUNCTIÓN DE LONGITUD

1 Manteniendo presionada c, presione una vez T, y mantenga presionada c hasta que se visualice br...

2 Manteniendo presionada c, continúe presionando T hasta que se visualice el ajuste de longitud d...

3 Suelte c. Si había seleccionado ON, se visualizará la longitud actual de la etiqueta.

4 Presione h o e para seleccionar la longitud deseada, o utilice las teclas numéricas para introd...

FUNCIÓN DE CORTE AUTOMÁTICO

1 Mientras mantiene presionada c, presione una vez Z y mantenga presionada c para visualizar al a...

2 Mientras mantiene presionada c, continúe presionando Z hasta que se visualice el ajuste de cort...

3 Suelte c para aplicar el ajuste de corte automático seleccionado.

TECLA DE IMPRESIÓN

FUNCIÓN DE AVANCE Y CORTE

FUNCIÓN DE NUMERACIÓN

1 Presione f, w, h, o e para colocar el cursor debajo del número que desee aumentar.

2 Mantenga presionada c y presione O. En el visualizador aparecerá el mensaje “NUMBER UNTIL” con ...

3 Presione una tecla numérica entre 1 y 9 (o presione h o e) para seleccionar el último número a ...

4 Para comenzar la impresión de etiquetas, presione p (o r ). El número de cada copia se visualiz...

FUNCIÓN DE IMPRESIÓN REPETIDA

1 Mantenga presionada c y presione I. En el visualizador aparecerá el mensaje “COPIES” con el aju...

2 Presione una tecla numérica entre 1 y 9 (o presione h o e) para seleccionar el número de copias...

3 Presione p (o r) para empezar a imprimir las etiquetas. Se visualizará el número de cada copia...

FUNCIONES DE LA MEMORIA

1 Mantenga presionada c y presione 7. En el visualizador aparecerá el mensaje “STORE” con el núme...

2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo donde quie...

3 Presione r. El texto se almacenará en el número de archivo seleccionado y volverá a aparecer en...

1 Mantenga presionada c y presione 8. En el visualizador aparecerá el mensaje “RECALL” con el núm...

2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo que conten...

3 Presione r. Cualquier texto previamente introducido se borrará y el texto introducido en el núm...

1 Mantenga presionada c y presione 9. En el visualizador aparecerá el mensaje “CLEAR” con el núme...

2 Presione una tecla numérica (o presione h o e) para seleccionar el número de archivo que conten...

3 Presione r. Aparecerá el mensaje “OK TO CLEAR?”.

4 Para borrar el archivo de texto seleccionado, presione r.

SOLUCIÓN DE PROBLEMAS

LISTA DE MENSAJES DE ERROR

ESPECIFICACIONES

ACCESORIOS (Sólo para EE.UU.)

INFORMACIÓN PARA CONTACTAR CON PT-2300/2310 (Sólo para EE.UU.)

Localización de centros de servicio

Asistencia operacional

Asistencia por Internet

Accesorios y suministros

Sistema de contestación por fax

Ahorre tiempo – Regístrese en Linea!

No pierda tiempo al teléfono. Despreocúpese por el correo. Visítenos en

www.registermybrother.com

Regístre su producto inmediatamente en nuestra base y listo.

También en su visita, encuentre información útil y participe en sorteos!

HOJA DE PEDIDOS DE ACCESORIOS PARA P-TOUCH (Sólo para EE.UU.)

INFORMACIÓN PARA CONTACTAR CON PT-2300/2310 (Sólo para EE.UU.)

Localización de centros de servicio

Asistencia operacional

Asistencia por Internet

Accesorios y suministros

Sistema de contestación por fax

Ahorre tiempo – Regístrese en Linea!

No pierda tiempo al teléfono. Despreocúpese por el correo. Visítenos en

www.registermybrother.com

Regístre su producto inmediatamente en nuestra base y listo.

También en su visita, encuentre información útil y participe en sorteos!

HOJA DE PEDIDOS DE ACCESORIOS PARA P-TOUCH (Sólo para EE.UU.)

background image

i

CONTENTS

Getting Started

GENERAL DESCRIPTION ................................................................................... 1

GENERAL PRECAUTIONS .................................................................................. 2

BATTERIES ......................................................................................................... 3

OPTIONAL AC ADAPTOR ................................................................................. 4

TAPE CASSETTE ................................................................................................. 5

CONNECTING THE P-TOUCH TO A COMPUTER ............................................ 6

INSTALLING P-TOUCH EDITOR ....................................................................... 7

STARTING P-TOUCH EDITOR ......................................................................... 20

ATTACHING LABELS ....................................................................................... 24

PRINT HEAD & ROLLERS ................................................................................. 25

For Your Information

POWER KEY ..................................................................................................... 26

CURSOR KEYS ................................................................................................. 26

CODE, ALT & SHIFT KEYS ............................................................................... 27

SPACE KEY ....................................................................................................... 30

RETURN KEY .................................................................................................... 30

TAB FUNCTION .............................................................................................. 31

DELETE KEY ..................................................................................................... 33

LINE OUT FUNCTION ..................................................................................... 34

CLEAR FUNCTION .......................................................................................... 35

ACCENT FUNCTION ....................................................................................... 37

SYMBOL FUNCTION ....................................................................................... 38

AUTO FORMAT FUNCTION ........................................................................... 40

STAMP FUNCTION .......................................................................................... 41

FONT FUNCTION ........................................................................................... 44

SIZE & WIDTH FUNCTIONS ............................................................................ 45

STYLE FUNCTION ........................................................................................... 47

UNDERLINE FUNCTION ................................................................................. 49

FRAME FUNCTION .......................................................................................... 50

TAPE MARGIN FUNCTION ............................................................................. 51

HORIZONTAL ALIGNMENT FUNCTION ........................................................ 52

Detailed Information for Brother PT 2300 User's Guide

Related Documents for Brother PT 2300 User's Guide

Brother 775 User Manual

Brother PT-1700 User Manual

Brother PT-110 User Manual

Brother QL-570VM User's Guide

Brother HL-1870N User's Guide

Brother MFC J625DW Open Source Licensing Remarks

Brother 882-U70 User Manual

Brother 7550MC User Manual

Brother 1830 User Manual

Brother HL-5240 User's Guide

Brother BM-3600 Quick Start Guide

Brother 885-S61 User Manual

Brother HL-3450CN Quick Setup Guide/ Network Setup Guide

Brother PT-1960 User's Guide

Brother DCP-8020 Quick Setup Guide

Brother DCP-8025D Network User's Guide

Brother DCP7020 User Manual

Brother MFC-3320CN User's Guide

Brother LN9953001 User Manual

Brother CP60X Warranty

Brother PT-1200 User Manual

Brother BE-1201 User Manual

Brother FAX-2920 Quick Setup Guide

Brother HL 2040 User's Guide

Brother PT-2610 User's Guide

Brother LB5000S Warranty

Brother PT-9700PC User's Guide

Brother DK1240 User Manual

Brother DCP-8045D User's Guide

Brother HL-5040 Quick Setup Guide

Brother NX-200 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother CS-8150 User's Guide

Brother HL-5150D Quick Setup Guide

Brother HL-5170DN Command Reference Guide for Software Developers

Brother PT-1600 User's Guide

Brother 885-U02 User Manual

Brother PT-1200 User Manual

Brother BAS-761 User Manual

Brother HL-6180DW Open Source Licensing Remarks

Brother HL-5280DW Command Reference Guide for Software Developers

Brother MFC-J875DW Open Source Licensing Remarks

Brother FAX-1860C Quick Setup Guide

Brother MFC-8460N Network User's Guide

Brother HL-5140 User Manual

Brother Fax User Manual

Brother LX-570 User Manual

Brother MFC-210C Quick Setup Guide

Brother HE 120 User's Guide

Brother HL-6050D User's Guide

Brother XL-3750 User's Guide

Brother MFC-5890CN Quick Setup Guide

Brother ADS2000 User Manual

Brother LB-6800 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 5490CN User Manual

Brother HL-6050D Command Reference Guide for Software Developers

Brother XS3109 Notification about included accessories

Brother MFC-240C Quick Setup Guide

Brother 5440CN User Manual

Brother Personal Embroidery Design Software System User Manual

Brother MFC-5860CN Quick Setup Guide

Brother PT-2430PC User Manual

Brother HL-2460 User's Guide

Brother SB7500 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 1034D Warranty

Brother BCL-D20 User Manual

Brother DCP-9040CN Quick Setup Guide

Brother 210C User Manual

Brother PT-9800PCN User's Guide

Brother FAX 1920CN User's Guide

Brother MFC J435W Open Source Licensing Remarks

Brother BES-1216 User Manual

Brother MFC-3340CN User's Guide

Brother PT-55 User Manual

Brother MFC-J4620DW Open Source Licensing Remarks

Brother DCP-135C User Manual

Brother PT-1400 User's Guide

Brother a User Manual

Brother MFC-9420CN Quick Setup Guide

Brother HL-4040CN Network User's Guide

Brother 1670N User Manual

Brother DCP-J152W Open Source Licensing Remarks

Brother DCP-120C User's Guide

Brother MFC-9420CN User's Guide

Brother FAX-1940CN Network User's Guide

Brother MFC J835DW Open Source Licensing Remarks

Brother TD-4000 User's Guide

Brother QL-550 Quick Start Guide

Brother Fax 1360 User's Guide

Brother MFC-7440N User's Guide

Brother MFC-620CN Network User's Guide

2020 Brother LS-2020 User's Guide

Brother FAX-2940 Open Source Licensing Remarks

Brother DCP-L2540DW Open Source Licensing Remarks

Brother PT-2310 User's Guide

Brother FAX-2910 Quick Setup Guide

Brother MFC-J4710DW Open Source Licensing Remarks

Brother MFC-8840D User's Guide

Brother MFC-5840CN Network User's Guide

Brother HL-5240 Command Reference Guide for Software Developers

Brother DCP-8040 Network User's Guide

Brother MFC-J4610DW Open Source Licensing Remarks

Brother MFC-J4510DW Open Source Licensing Remarks

Brother MFC-5490CN Quick Setup Guide

Brother PT-2410 User's Guide

Brother ST150HDH Warranty

Brother 885-U01 User Manual

Brother MFC J5910DW Open Source Licensing Remarks

Brother 882-U10 User Manual

Brother XF0606-001 User Manual

Brother FAX-2480C Quick Setup Guide

Brother 885-U11 User Manual

Brother P-touch 550 User Manual

Brother MFC-845CW Quick Setup Guide

Brother 1300 User Manual

Brother FAX-2580C Quick Setup Guide

Brother HL-5070N Command Reference Guide for Software Developers

Brother MFC-8910DW Open Source Licensing Remarks

Brother 2170W User Manual

Brother MFC-J6925DW Open Source Licensing Remarks

Brother DCP-8020 User's Guide

Brother ST371HD Specification

Brother HL-5470DW Open Source Licensing Remarks

Brother 8060 User Manual

Brother DCP-185C User Manual

Brother PT-2700 User Manual

Brother MFC-7840W Quick Setup Guide

Brother MFC-8840D Quick Setup Guide

Brother DCP8045D User Manual

Brother HL-5170DN Quick Setup Guide

Brother XR-9000 Operation Manual

Brother MFC-7345N Network User's Guide

Brother HL-4200CN Quick Setup Guide

Brother HL-4200CN User's Guide

Brother PT-9500PC User's Guide

Brother MFC-3220C User's Guide

Brother PT-1700 User's Guide

Brother MFC-7420 Quick Setup Guide

Brother MFC-5460CN Quick Setup Guide

Brother HL-L2360DW Open Source Licensing Remarks

Brother MFC-665CW User's Guide

Brother MFC-7345N Quick Setup Guide

Brother 560 User Manual

Brother HL-4040CDN Command Reference Guide for Software Developers

Brother 1940CN User Manual

Brother MFC-5460CN User Manual

Brother PT-1100 User Manual

Brother MFC-8860DN User Manual

Brother 1280 User Manual

Brother MFC-J650DW Open Source Licensing Remarks

Brother MFC-640CW Network User's Guide

Brother MFC-3360C User's Guide

Brother MFC J280W Open Source Licensing Remarks

Brother 1800 User Manual

Brother PT-1950 User's Guide

Brother FAX-2840 Open Source Licensing Remarks

Brother PT-1750 User Manual

Brother HL-2140 Quick Setup Guide

Brother MFC-8860DN Quick Setup Guide

Brother LS-1217 User's Guide

Brother HL-4070CDW User's Guide

Brother ADS2500W User Manual

Brother DCP-8065DN Network User's Guide

Brother HL-5070N Quick Setup Guide

Brother PS9000 User Manual

Brother MFC-7220 Quick Setup Guide

Brother MFC-685CW Network User's Guide

Brother MFC-820CW User's Guide

Brother 2900 User Manual

Brother SE1800 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother MFC-420CN Quick Setup Guide

Brother MFC-8660DN User's Guide

Brother 2340CV User Manual

Brother PE550D Warranty

Brother 1650 User Manual

Brother 1260 User Manual

Brother LN6226001 User Manual

Brother LA3776001 User Manual

Brother 565 User Manual

Brother MFC-L2720DW Open Source Licensing Remarks

Brother 882-W02 User Manual

Brother 7225n User Manual

Brother PT-2700 User's Guide

Brother QL-1050 User's Guide

Brother PT-1090 User's Guide

Brother MFC-J4310DW Open Source Licensing Remarks

Brother HL-5350DN Command Reference Guide for Software Developers

Brother DCP-770CW User Manual

Brother ST4031HD Use and Care Manual

Brother 1300 User Manual

Brother MFC-L8600CDW Open Source Licensing Remarks

Brother PT-2030 User Manual

Brother MFC-7820N Quick Setup Guide

Brother DCP-130C User's Guide

Brother 1230PC User Manual

Brother MFC-L8850CDW Open Source Licensing Remarks

Brother HS-2500 Quick Reference Guide

Brother DCP-8045D Network User's Guide

Brother HL-5050 Command Reference Guide for Software Developers

Brother HL-5070N User's Guide

Brother DCP-7030 User's Guide

Brother HL-5150D Command Reference Guide for Software Developers

Brother 1660e User Manual

Brother QL-700 Raster Command Reference

Brother BCL-D60 User Manual

Brother MFC-7840W User's Guide

Brother MFC-3320CN Quick Setup Guide

Brother HL-4050CDN User Manual

Brother 1010 User Manual

Brother HL-2240D Command Reference Guide for Software Developers

Brother LB5000M Warranty

Brother HL-6180DWT Open Source Licensing Remarks

Brother HL-L2380DW Open Source Licensing Remarks

Brother FAX-1940CN Quick Setup Guide

Brother 681B-UG User Manual

Brother HL-1450 Command Reference Guide for Software Developers

Brother HL-1650 Command Reference Guide for Software Developers

Brother MFC-8440 Quick Setup Guide

Brother 884-T05 User Manual

Brother LS-1717 User's Guide

Brother MFC-3820CN Quick Setup Guide

Brother HL-2600CN Quick Setup Guide/ Network Setup Guide

Brother MFC-8950DW Open Source Licensing Remarks

Brother FAX-8070P User Manual

Brother MFC-L2705DW Open Source Licensing Remarks

Brother ST371HD Use and Care Manual

Brother 3240C User Manual

Brother HL-4000CN User Manual

Brother HL-5280DW User's Guide

Brother HL-1435 Quick Setup Guide

Brother TD-4100N User's Guide

Brother 2500D User Manual

Brother 770 User Manual

Brother MFC-8870DW Network User's Guide

Brother MFC-640CW User's Guide

Brother MFC-685CW User's Guide

Brother HL-5250DN Quick Setup Guide

Brother MFC-J5920DW Open Source Licensing Remarks

Brother LW6091001 User Manual

Brother HL-7050N Quick Setup Guide

Brother BE-901-PC User Manual

Brother XL-6562 User's Guide

Brother DCP-350C User's Guide

Brother PT-1010 User's Guide

Brother SB4138 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother FAX-2580C User's Guide

Brother PT-2600 User's Guide

Brother MFC J825DW Open Source Licensing Remarks

Brother MFC-8460N Quick Setup Guide

Brother HL-L9200CDWT Open Source Licensing Remarks

Brother SE-400 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother SM2700 Use and Care Manual

Brother DK1219 User Manual

Brother MFC-640CW Quick Setup Guide

Brother SB8000 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother PT-1230PC User Manual

Brother PR1000e Operation Manual for Premium Pack I (Optional accessories)

Brother HL-2170W Quick Setup Guide

Brother FAX 2820 Quick Setup Guide

Brother MFC-8220 Quick Setup Guide

Brother MFC-8460N User's Guide

Brother MFC-8670DN Quick Setup Guide

Brother NX-250 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 8065DN User Manual

Brother HL-2600CN Command Reference Guide for Software Developers

Brother PT-2710 User's Guide

Brother MFC-9440CN Quick Setup Guide

Brother CS7205 Notification about included accessories

Brother LN6645001 User Manual

Brother 882-U71 User Manual

Brother MFC-8860DN Network User's Guide

Brother PT-9800PCN Network User's Guide

Brother FAX 1920CN Network User's Guide

Brother HL-4040CN Quick Setup Guide

Brother DCP-8110DN Open Source Licensing Remarks

Brother NC-7100W User Manual

Brother PT-1290 User's Guide

Brother MFC-8670DN Network User's Guide

Brother MFC-5840CN User's Guide

Brother SX-4000 User Manual

Brother MFC J425W Open Source Licensing Remarks

Brother MFC-8860DN User's Guide

Brother 7420 User Manual

Brother PT-9400 User Manual

Brother 2440C User Manual

Brother 882-W01 User Manual

Brother BE-1201-PC User Manual

Brother 340 User Manual

Brother ML-300 User Manual

Brother MFC-7340 User's Guide

Brother MFC-9840CDW Network User's Guide

Brother DCP-8025D User Manual

Brother MFC-L2680W Open Source Licensing Remarks

Brother MFC-7820N User's Guide

Brother MFC-8220 Network User's Guide

Brother PT-1600 Quick Reference Guide

Brother HL-2070N Command Reference Guide for Software Developers

Brother HL-1250 Command Reference Guide for Software Developers

Brother PT-9700PC ESC/ P Command Reference

Brother FAX-2910 User's Guide

Brother SM2700 Warranty

Brother DCP-120C Quick Setup Guide

Brother FAX-2440C User's Guide

Brother DCP-7020 Quick Setup Guide

Brother HL-4070CDW Network User's Guide

Brother PT-1830 User's Guide

Brother DCP-8040 Quick Setup Guide

Brother 1290 User Manual

Brother 2920 User Manual

Brother N User Manual

Brother MFC-8640D Quick Setup Guide

Brother MFC-7240 Open Source Licensing Remarks

Brother PT-90 User's Guide

Brother DCP-110C Quick Setup Guide

Brother PT-2110 Software Installation Guide

Brother 1240 User Manual

Brother PT 2100 User's Guide

Brother MFC-8440 User's Guide

Brother HL-7050 Quick Setup Guide

Brother MFC-J245 Open Source Licensing Remarks

Brother MFC-8660DN Network User's Guide

Brother 530 User Manual

Brother 5840CN User Manual

Brother HL-7050 User's Guide

Brother DCP-165C User Manual

Brother 342Fi User Manual

Brother DCP-7020 User's Guide

Brother 1034D Specification

Brother 1810 User Manual

Brother SM1400 Warranty

Brother HL-5170DN User's Guide

Brother MFC-9440CN User's Guide

Brother FAX-1960C Quick Setup Guide

Brother MFC-J450DW Open Source Licensing Remarks

Brother MFC-4820C Quick Setup Guide

Brother MFC-230C Quick Setup Guide

Brother 885-S27 User Manual

Brother MFC-5440CN Network User's Guide

Brother PS-9000 Quick Setup Guide

Brother DCP-8025D User's Guide

Brother 2410 User Manual

Brother PED Basic User Manual

Brother 1250 User Manual

Brother DK1202 User Manual

Brother FAX 2820 User's Guide

Brother 8220 User Manual

Brother MFC-J680DW Open Source Licensing Remarks

Brother XR-65T User's Guide

Brother PT-2710 Software Installation Guide

Brother XL-6452 User's Guide

Brother MFC-465CN Quick Setup Guide

Brother 1180 User Manual

Brother MFC-5860CN User's Guide

Brother 2820 User Manual

Brother MFC-7225N Network User's Guide

Brother HL-2700CN Command Reference Guide for Software Developers

Brother SE425 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother MFC-4820C User's Guide

Brother 2210 User Manual

Brother PT-1230PC User's Guide

Brother DCP-330C User's Guide

Brother MFC-230C User's Guide

Brother PT-1280 User's Guide

Brother HL-6050DN Network User's Guide

Brother HL-5030 User Manual

Brother MFC-9420CN Network User's Guide

Brother WP330MDS User Manual

Brother MFC-5860CN User Manual

Brother PT 1000 User's Guide

Brother HL-2170W Command Reference Guide for Software Developers

Brother HL-1435 User's Guide

Brother MFC-8460N User Manual

Brother PE-300S User's Guide

Brother PS-9000 User's Guide

2000 Brother CM-2000 User Manual

Brother HL-4040CDN User's Guide

Brother 750E User Manual

Brother 1240 User Manual

Brother 2070N User Manual

Brother 2750 User Manual

Brother MFC-3340CN Quick Setup Guide

Brother 6000D User Manual

Brother 2820 User Manual

Brother QL-500 Quick Start Guide

Brother 1840C User Manual

Brother HL-2240 Command Reference Guide for Software Developers

Brother CP-7500 Quick Reference Guide

Brother MFC-J4420DW Open Source Licensing Remarks

Brother LN7629001 User Manual

Brother PT-1230PC User Manual

Brother BE-901 User Manual

Brother PT-1290 User Manual

Brother HL-4000CN User's Guide

Brother 2100 User Manual

Brother PT-1650 User's Guide

Brother MFC-820CW Quick Setup Guide

Brother LN9961001 User Manual

Brother MFC-885CW Network User's Guide

Brother MFC-J475DW Open Source Licensing Remarks

Brother HL-5140 User's Guide

Brother DCP-7045N User Manual

Brother BCL-D10 User Manual

Brother HL-5040 User's Guide

Brother 885 User Manual

Brother 7025 User Manual

Brother HL-L8250CDN Open Source Licensing Remarks

Brother MFC-7340 Quick Setup Guide

Brother FAX 1840C User's Guide

Brother DCP-8025D Quick Setup Guide

Brother PT-2030 User's Guide

Brother FAX-2800 Quick Setup Guide

Brother MFC-J885DW Open Source Licensing Remarks

Brother DCP-330C Quick Setup Guide

Brother PT-2030 User Manual

Brother 580MC User Manual

Brother HL-5450DN Open Source Licensing Remarks

Brother BAS-311G User Manual

Brother SC3000 Notification about included accessories

Brother MFC-8820DN Network User's Guide

Brother MFC-J4320DW Open Source Licensing Remarks

Brother 1660 User Manual

Brother LX-910D User Manual

Brother 884-T09 User Manual

Brother 4100e User Manual

Brother MFC-490CW Quick Setup Guide

Brother MFC-885CW User's Guide

Brother LN9049001 User Manual

Brother MFC-8950DWT Open Source Licensing Remarks

Brother HL-5030 Network User's Guide

Brother MFC-J5720DW Open Source Licensing Remarks

Brother DCP7010 User Manual

Brother MFC-5440CN User's Guide

Brother 8060P MFC-9060 User Manual

Brother 1800 User Manual

Brother MFC-8840D User Manual

Brother FAX 255 User Manual

Brother MFC-8870DW User's Guide

Brother Fax 1360 Quick Setup Guide

Brother 7600 User Manual

Brother LN9963001 User Manual

Brother MFC-7440N Quick Setup Guide

Brother 2200 User Manual

Brother MFC-8510DN Open Source Licensing Remarks

Brother HE-240 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-L2300D Open Source Licensing Remarks

Brother HL-4070CDW Command Reference Guide for Software Developers

Brother PT-7100 User's Guide

Brother FAX-1860C User's Guide

Brother PT-1650 Quick Reference Guide

Brother 5750e User Manual

Brother HL-5250DN User's Guide

Brother HL-5050 Network User's Guide

Brother 3550 User Manual

Brother LX-900 User Manual

Brother BCL-D20 User Manual

Brother FAX 1920CN User Manual

Brother 1435 User Manual

Brother SE-270D Quick Reference Guide

Brother HL-3450CN Command Reference Guide for Software Developers

Brother XR-52C User's Guide

Brother 4750e User Manual

Brother HL-5280DW Quick Setup Guide

Brother PT-300 User Manual

Brother SM1704 Specification

Brother PT-9800PCN ESC/ P Command Reference

Brother 600 User Manual

Brother 2430PC User Manual

Brother hl-1270n Command Reference Guide for Software Developers

Brother BM-2700 User's Guide

Brother DCP-8045D Quick Setup Guide

Brother MFC-J880DW Open Source Licensing Remarks

Brother PT-7500 User's Guide

Brother PT-2700 Quick Setup Guide

Brother 2480C User Manual

Brother BE-1201B-AC-PC User Manual

Brother PT-2400 User's Guide

Brother MFC-J6520DW Open Source Licensing Remarks

Brother HL-1670N Quick Setup Guide

Brother HL-5040 Network User's Guide

Brother PT-2030AD User's Guide

Brother MFC-8440 Network User's Guide

Brother QL-570VM Quick Reference Guide

Brother 1200 User Manual

Brother PT-320 User Manual

Brother HL-L8350CDW Open Source Licensing Remarks

Brother MFC-5490CN User's Guide

Brother MFC-3820CN Network User's Guide

Brother LN7424001 User Manual

Brother HL-2150N User Manual

Brother MFC-8870DW User Manual

Brother HL-2070N User's Guide

Brother DCP-7040 User's Guide

Brother DK1204 User Manual

Brother LS 30 User's Guide

Brother HL-5070N User Manual

Brother PED Basic Instruction Manual

Brother SE-350 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother DCP-7040 Quick Setup Guide

Brother DZ2400 Notification about included accessories

Brother MFC-4420C User's Guide

Brother MFC-665CW Quick Setup Guide

Brother MFC-8840DN User's Guide

Brother QL-1050N User's Guide

Brother HL-L2305W Open Source Licensing Remarks

Brother CS-8060 User's Guide

Brother SE-270D User's Guide

Brother HL-2220 Command Reference Guide for Software Developers

Brother NX570Q Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-5140 Quick Setup Guide

Brother 2030 User Manual

Brother 2040 User Manual

Brother 1060 User Manual

Brother MFC-7225N User's Guide

Brother MFC-J6920DW Open Source Licensing Remarks

Brother MFC-5840CN Quick Setup Guide

Brother MFC-J6720DW Open Source Licensing Remarks

Brother LS-590 User's Guide

Brother HL-4040CN User Manual

Brother DCP-145C User Manual

Brother LW1704001 User Manual

Brother 8440 User Manual

Brother PT-2730 User Manual

Brother QL-1060N User's Guide

Brother QL-600 Raster Command Reference

Brother MFC-620CN Quick Setup Guide

Brother HL-1850 Command Reference Guide for Software Developers

Brother DK1241 User Manual

Brother HL-2700CN User's Guide

Brother HL-2700CN Network User's Guide

Brother DCP-8040 User's Guide

Brother SM2700 Notification about built-in utility stitches, features and included accessories

Brother QL-550 User's Guide

Brother XR-7700 Quick Start Guide

Brother MFC-7220 User's Guide

Brother DK1203 User Manual

Brother BES-916 User Manual

Brother MFC-440CN Network User's Guide

Brother MFC-5460CN User's Guide

Brother SM1400 Specification

Brother MFC-3240C User's Guide

Brother HL-2170W Network User's Guide

Brother DCP8040 User Manual

Brother DCP-8020 Network User's Guide

Brother MFC-5440CN Quick Setup Guide

Brother HL-5030 Quick Setup Guide

Brother HL-L2320D Open Source Licensing Remarks

Brother SV-100B User Manual

Brother PT-1400 Quick Reference Guide

Brother FAX-2480C User's Guide

Brother DCP 8060 User's Guide

Brother PE-DESIGN 7 User Manual

Brother MFC-210C User's Guide

Brother MFC-3360C Quick Setup Guide

Brother HL-2230 Command Reference Guide for Software Developers

Brother QL-570 User's Guide

Brother PT-P750W Open Source Licensing Remarks

Brother DK1218 User Manual

Brother MFC-5860CN Network User's Guide

Brother HL-5050 User's Guide

Brother MFC-J285DW Open Source Licensing Remarks

Brother MFC-7820N Network User's Guide

Brother JX2517 Quick Reference Guide

Brother MFC-L2740DW Open Source Licensing Remarks

Brother 1 User Manual

Brother SE1900 Warranty

Brother QL-1050 Quick Start Guide

Brother QL-500 User's Guide

Brother HL-5170DN Network User's Guide

Brother CP100X Warranty

Brother HL-L8350CDWT Open Source Licensing Remarks

Brother PT-70 User's Guide

Brother HL-4040CN Command Reference Guide for Software Developers

Brother MFC-685CW Quick Setup Guide

Brother MFC J430w Open Source Licensing Remarks

Brother HL-5440D Open Source Licensing Remarks

Brother QL-650TD User's Guide

Brother MFC-440CN User's Guide

Brother FAX-1940CN User's Guide

Brother FAX 1840C Quick Setup Guide

Brother DVR-N4 User Manual

Brother FAX-2920 User's Guide

Brother Fax 1360 User Manual

Brother SDX125E Instructions / Assembly

Brother PT-2110 User's Guide

Brother MFC-J460DW Open Source Licensing Remarks

Brother MFC-J5520DW Open Source Licensing Remarks

Brother 750 User Manual

Brother MFC-J470DW Open Source Licensing Remarks

Brother CS7000i Warranty

Brother 515 User Manual

Brother PT-2430PC User's Guide

Brother MFC-8840D Network User's Guide

Brother FAX-2900 Quick Setup Guide

Brother PT-1180 User's Guide

Brother MFC-7440N Network User's Guide

Brother NC6100H User Manual

Brother HL-1470N Command Reference Guide for Software Developers

Brother HL-4050CDN User Manual

Brother SM1704 Use and Care Manual

Brother HL-7050 Network User's Guide

Brother MFC-8420 Network User's Guide

Brother LX-1200 User Manual

Brother HL-1870N Command Reference Guide for Software Developers

Brother DK1207 User Manual

Brother MFC-8670DN User's Guide

Brother DCP-8065DN Quick Setup Guide

Brother PT-1800 User's Guide

Brother MFC-3320CN Network User's Guide

Brother CP-6500 Quick Reference Guide

Brother LN7808001 User Manual

Brother 1840C User Manual

Brother SM3701 Warranty

Brother MFC-885CW Quick Setup Guide

Brother ST4031HD Warranty

Brother MFC-3820CN User's Guide

Brother DCP-350C Quick Setup Guide

Brother MFC-7420 User's Guide

Brother CS-80 User's Guide

Brother MFC-8640D User's Guide

Brother LS-1520 User's Guide

Brother 1830 User Manual

Brother MFC-440CN Quick Setup Guide

Brother HL-6050DN User's Guide

Brother HL-2270DW Command Reference Guide for Software Developers

Brother HL-2070N Quick Setup Guide

Brother HL-5130 User Manual

Brother MFC-J5620DW Open Source Licensing Remarks

Brother PT-80 User Manual

Brother PT-1500PC User Manual

Brother NX-600 Quick Reference Guide

Brother CS7000i Notification about included accessories

Brother 1575MC User Manual

Brother DCP-165C Quick Setup Guide

Brother DK1208 User Manual

Brother MFC-420CN Network User's Guide

Brother HL-5150D User's Guide

Brother MFC-3340CN Network User's Guide

Brother HL-2600CN User's Guide

Brother 2300 User Manual

Brother HL-2700CN Quick Setup Guide

Brother DCP7025 User Manual

Brother DCP-7030 Quick Setup Guide

Brother MFC-845CW Network User's Guide

Brother MFC-8840DN Quick Setup Guide

Brother HL-5050 Quick Setup Guide

Brother MFC-8840DN Network User's Guide

Brother PT-9500PC Software Installation Guide

Brother MFC-J870DW Open Source Licensing Remarks

Brother DK1201 User Manual

Brother QL-580N User's Guide

Brother HL-5040 User Manual

Brother MFC-L9550CDW Open Source Licensing Remarks

Brother PT-1810 User's Guide

Brother HL-L2340DW Open Source Licensing Remarks

Brother HL-1850 User's Guide

Brother DCP-L2520DW Open Source Licensing Remarks

Brother DCP-9045CDN User Manual

Brother HL-7050 Command Reference Guide for Software Developers

Brother 1880 User Manual

Brother 660MC User Manual

Brother FAX-1960C User's Guide

Brother PT-1750 User's Guide

Brother PT-1500PC Quick Reference Guide

Brother MFC-465CN User's Guide

Brother MFC-8710DW Open Source Licensing Remarks

Brother MFC-5840CN User Manual

Brother HL-5280DW Network User's Guide

Brother 600 User Manual

Brother PT-2700 Software Installation Guide

Brother HL-7050N Network User's Guide

Brother MFC-820CW Network User's Guide

Brother 1820C User Manual

Brother PR 1000 Operation Manual for Premium Pack I (Optional accessories)

Brother HL-5250DN Network User's Guide

Brother HL-5150D User Manual

Brother MFC-7345N User's Guide

Brother 8840D User Manual

Brother MFC-8810DW Open Source Licensing Remarks

Brother 855-X06 User Manual

Brother MFC-J4410DW Open Source Licensing Remarks

Brother CS7000i Replacement Part List

Brother HL-5470DWT Open Source Licensing Remarks

Brother NX-600 Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother 285 User Manual

Brother MFC-9070 User Manual

Brother 3.1 User Manual

Brother 7010 User Manual

Brother SM1704 Replacement Part List

Brother HL-5340D Command Reference Guide for Software Developers

Brother 3034D User Manual

Brother ML100 User Manual

Brother HL-5240 Quick Setup Guide

Brother NC9100H User Manual

Brother MFC-5460CN Network User's Guide

Brother GT541 User Manual

Brother DK1221 User Manual

Brother HL-5150DN User Manual

Brother PT-1600 User Manual

Brother MFC-665CW Network User's Guide

Brother PC-6500 User's Guide

Brother QL-1050N Quick Start Guide

Brother PT-9500PC Quick Reference Guide

Brother HL-2140 User's Guide

Brother 4000D User Manual

Brother MFC-8640D Network User's Guide

Brother MFC-8440 User Manual

Brother 8045D User Manual

Brother HL-4040CDN Network User's Guide

Brother HL-5140 Command Reference Guide for Software Developers

Brother MFC-J480DW Open Source Licensing Remarks

Brother PT-9600 User's Guide

Brother HL-3450CN User's Guide

Brother HL-6050DN Command Reference Guide for Software Developers

Brother MFC-J485DW Open Source Licensing Remarks

Brother HL-4040CDN Quick Setup Guide

Brother 2400 User Manual

Brother PT-2710 Quick Setup Guide

Brother 7030 User Manual

Brother SM1400 Replacement Part List

Brother MFC-240C User's Guide

Brother HL-5250DN Command Reference Guide for Software Developers

Brother PT-7600 User's Guide

Brother BE-0901E-AC-PC User Manual

Brother MFC-7225N Quick Setup Guide

Brother DCP-8150DN Open Source Licensing Remarks

Brother ST371HD Warranty

Brother HL-2170W User's Guide

Brother HL-5030 User's Guide

Brother HL-4070CDW Quick Setup Guide

Brother 7840W User Manual

Brother MFC-620CN User's Guide

Brother 1000 User Manual

Brother MFC-8660DN Quick Setup Guide

Brother HL-2070N Network User's Guide

Brother 2460 User Manual

Brother PT-2730 Software Installation Guide

Brother MFC-420CN User's Guide

Brother DCP 8060 Quick Setup Guide

Brother HL-2140 Command Reference Guide for Software Developers

Brother HL-1670N Command Reference Guide for Software Developers

Brother XR9550 Warranty

Brother MFC-7840W Network User's Guide

Brother HL-2460 Command Reference Guide for Software Developers

Brother CS5055 Warranty

Brother TD-4000 Additional Operation Guide (Connecting a Barcode Scanner)

Brother DCP-8040 User Manual

Brother DK1209 User Manual

Brother 2340CV Warranty

Brother PT-2730 User's Guide

Brother NX-650Q Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)

Brother HL-1650 Quick Setup Guide

Brother 4100 User Manual

Brother EM-630 User Manual

Brother MFC-465CN Network User's Guide

Brother 560 User Manual

Brother HL-4040CN User's Guide

Brother MFC-5440CN User Manual

Brother HL-7050N Command Reference Guide for Software Developers

Brother HL-5050 User Manual

Brother MFC-410CN User Manual

Brother HL 2040 Quick Setup Guide

Brother PT 2100 Software Installation Guide

Brother MFC-L2700DW Open Source Licensing Remarks

Brother FAX-2440C Quick Setup Guide

Brother BM-2700 Quick Start Guide

Brother BM-3600 User's Guide

Brother MFC-660CN User Manual

Brother DCP-130C Quick Setup Guide

Brother 7500 User Manual

Brother DCP-8155DN Open Source Licensing Remarks

Brother MFC-8820D Network User's Guide

Brother 885-U22 User Manual

Brother pt300 User Manual

Brother 540 User Manual

Brother HL-7050N User's Guide

Brother HL-5070N Network User's Guide

Brother HL-5040 Command Reference Guide for Software Developers

Brother 285C User Manual

Brother MFC-4420C Quick Setup Guide

Brother CS-8072 User's Guide

Brother 3800 User Manual

Brother FAX-1820C User's Guide

Brother DCP-8065DN User's Guide

Brother MFC-3240C Quick Setup Guide

Brother MFC-845CW User's Guide

Brother 1960C User Manual