PRINT HEAD & ROLLERS; To clean the print head and rollers:; PRINT HEAD & ROLLERS- Page 29

25

PRINT HEAD & ROLLERS

Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.
This is particularly likely when you are using the unit outdoors or in a very dusty environment.
If a section of the print head is covered with dust, a blank horizontal streak may appear
through the label text. Therefore, as with a tape recorder, the machine’s head may need to be
cleaned from time to time.

To clean the print head and rollers:

1

Turn off the machine.

2

Open the tape compartment cover, then remove the tape cassette if one is installed. The
print head and rollers are located in the tape compartment.

3

Print head: Use a dry cotton swab to gently wipe the print head with an up-and-down
motion.
Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while
rotating them with your finger.

4

Install a tape cassette, close the tape compartment cover, and then try printing again.

5

If dust still remains, repeat steps 

3

 and 

4

 using a cotton swab dipped in isopropyl (rub-

bing) alcohol.

If none of the above works, contact your service representative.

Print head

Print head

Rollers

Cotton swab