The label is not cut ; Label files saved ; previously are now - Page 80

TROUBLESHOOTING

74

What to do when...

The label is not cut 
automatically.

Is Cut Option set to Chain or 
No Cut?

When these options are set, 
the tape is not fed after 
printing the label. Check the 
Cut Option setting, or hold 
down the 

 key and press 

the 

 key to feed and 

cut the tape.

Is Manual Cutting set to ON?

When using Fabric Iron-On 
Tapes or  Extra Strength 
Adhesive Tapes, please use 
scissors to cut the tape after 
printing.
When using other tapes, 
refer to “Manual Cutting” on 
page 64 and set the Manual 
Cutting to OFF to cut the 
tape automatically.

Label files saved 
previously are now 
empty.

Have the batteries and AC 
adapter been disconnected?

All files stored in the internal 
memory is lost if the 

batteries

 and AC adapter are 

disconnected for longer than 
one minute.

Is there enough power 
remaining in the batteries?

All data stored in the internal 
memory is lost if the 
batteries become empty.

Have you used the Reset 
function?

The reset function clears all 
data stored in the internal 
memory, including label 
files.

Problem

Cause

Solution