Inserting a Tape Cassette; GETTING STARTED- Page 24

18

Inserting a Tape Cassette

GETTING STARTED

Tape cassettes of 9/64", 1/4", 3/8", 1/2", 3/4", or 1" (3.5mm, 6mm, 9mm, 12mm, 18mm, 
or 24mm) width can be used in your P-touch labeler.  Use only Brother tape cassettes 
with the 

 mark.

Check that the end of the tape is not bent and 
that it passes through the tape guide.

After making sure that the power is off, lift open the 
tape compartment cover. If there is already a tape 
cassette in the machine, remove it by pulling it 
straight up.

Insert the tape cassette into the tape 
compartment, with the end of the tape 
facing the machine's tape exit slot, and 
press firmly until you hear a click.

Inserting a Tape Cassette

If the new tape cassette has a cardboard stopper, be sure to remove 
the stopper before inserting the cassette.

WATNLA

TION

End of tape

Tape guide

1

2

When inserting the tape cassette, 
make sure that the tape and ink 
ribbon do not catch on the print head.

Tape exit slot

3