Manual Cutting; Adjusting the Label Length; LABEL PRINTING- Page 70

LABEL PRINTING

64

Manual Cutting

When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set "On" for 
Manual Cutting before printing. After printing, remove the tape cassette from the 
machine and use scissors to cut the tape.

Press the 

 key to display the setup menu, select 

"Manual Cutting" using the   or   keys, and then 
press the 

 or   key.

Select the value by using the   or   keys.

Press the 

 or   key to apply the setting.

You can adjust the length of the printed label in levels of -5 to +5.

Press the 

 key. The current settings are 

displayed.

Select "Adjust Length" by using the   or   keys, and 
then set the value by using the   or   keys.

Press the 

 or   key to apply the setting.

Manual Cutting

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to default setting (“Off”).

Adjusting the Label Length

1

2

3

• Press the 

 key to return to the previous step.

• Press the 

 key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.